Water hardness in Washington

Tap and well water across Washington is moderately hard on average: a median of 74 mg/L, or 4.3 grains per gallon. That makes it the 31st hardest of 51 states.

890monitoring sites
37,163lab samples
2000–2025sample years
74mg/L
4.3 grains per gallon
Moderately hard

Washington water hardness map by county

Each county is shaded by the median of its monitoring sites. Click a county for local detail.

King County: 61 mg/L (Moderately hard)Lincoln County: 178 mg/L (Hard)Pend Oreille County: no dataAsotin County: 96 mg/L (Moderately hard)Skagit County: 9 mg/L (Soft)Franklin County: 240 mg/L (Very hard)Whitman County: 114 mg/L (Moderately hard)Yakima County: 178 mg/L (Hard)Clark County: 51 mg/L (Soft)Benton County: 67 mg/L (Moderately hard)Kittitas County: 44 mg/L (Soft)Wahkiakum County: no dataIsland County: 289 mg/L (Very hard)Clallam County: 51 mg/L (Soft)Grays Harbor County: no dataPacific County: 16 mg/L (Soft)San Juan County: 163 mg/L (Hard)Spokane County: 24 mg/L (Soft)Whatcom County: 125 mg/L (Hard)Douglas County: 68 mg/L (Moderately hard)Grant County: 176 mg/L (Hard)Snohomish County: 31 mg/L (Soft)Okanogan County: 94 mg/L (Moderately hard)Ferry County: 106 mg/L (Moderately hard)Cowlitz County: 16 mg/L (Soft)Mason County: 40 mg/L (Soft)Columbia County: no dataAdams County: 233 mg/L (Very hard)Skamania County: 62 mg/L (Moderately hard)Jefferson County: 25 mg/L (Soft)Walla Walla County: 66 mg/L (Moderately hard)Pierce County: 51 mg/L (Soft)Chelan County: 10 mg/L (Soft)Garfield County: 114 mg/L (Moderately hard)Thurston County: 58 mg/L (Soft)Klickitat County: 63 mg/L (Moderately hard)Kitsap County: 88 mg/L (Moderately hard)Lewis County: 15 mg/L (Soft)Stevens County: 73 mg/L (Moderately hard)
SoftModerately hardHardVery hardNo data

How hard is water in Washington?

Of the 890 monitoring sites in Washington, 39% measure soft, 28% moderately hard, 15% hard and 18% very hard. Half of all sites fall between 42 and 152 mg/L.

Groundwater (wells and springs) has a median of 112 mg/L, while rivers, lakes and reservoirs average 46 mg/L. Homes on private wells usually have harder water than homes on city supplies drawn from surface water.

Largest cities

Seattle 28 mg/L
Spokane 70 mg/L
Tacoma 63 mg/L
Vancouver 74 mg/L
Bellevue 71 mg/L
Kent 52 mg/L
Everett 66 mg/L
Spokane Valley 22 mg/L
Renton 56 mg/L
Federal Way 80 mg/L

PFAS in Washington drinking water

In EPA's UCMR 5 study, 248 public water systems in Washington tested their drinking water for 29 PFAS ("forever chemicals"). 68 (27%) found at least one, and 34 had a PFOA or PFOS sample above EPA's 4 ppt limit. Of the 79 Washington towns on this site matched to a main water system, 50 had no PFAS detected and 15 had a PFOA or PFOS result above 4 ppt.

Highest PFOA and PFOS results in Washington

TownWater systemPFOAPFOS
Moses LakeCity of Moses Lake ND52.2 ppt
VancouverCity of Vancouver 11.5 ppt18.6 ppt
RichlandCity of Richland 10.1 ppt17 ppt
ParklandParkland Light & Water Company 6.2 ppt13.8 ppt
CamasCamas Municipal Water Sewer System 4.4 ppt12 ppt
KennewickCity of Kennewick 4.6 ppt11.5 ppt
SammamishSammamish Plateau Water & Sewer ND11.1 ppt
CovingtonCovington Water District ND8.6 ppt
SpanawaySpanaway Water Company 6.2 ppt8.3 ppt
WashougalCity of Washougal ND7.9 ppt
SpokaneCity of Spokane ND6.1 ppt
LakewoodLakewood Water District ND5.9 ppt
OlympiaCity of Olympia 4.3 ppt5.8 ppt
CentraliaCentralia Public Works - Water ND5.8 ppt
RedmondCity of Redmond Water System ND5 ppt

Highest single sample; one result above a limit is not a violation (limits apply to yearly averages from 2029). "ND" = not detected. PFAS in every state · What PFAS levels mean · Source: EPA UCMR 5

Lead pipes in Washington

Community water systems in Washington reported 3,676 lead service lines, 6,753 galvanized lines requiring replacement and 225,558 lines of unknown material (11% of all lines) to EPA, as of the first quarter of 2026. Of the 76 Washington towns on this site with a reported inventory, 43 have no lead, galvanized or unknown lines.

Towns with the most lead service lines in Washington

TownLeadGalvanized (replace)UnknownShare lead
Airway Heights1,777042650%
Auburn7928,149<1%
Spokane01,00100%
Longview0108330%
West Richland09100%
Kirkland08200%
Sumner0659470%
Gig Harbor04300%
Anacortes0327,8580%
Ridgefield01400%

Lead pipes in every state · How to check your own pipe · Source: EPA service line inventory

Drinking water violations in Washington

Since 2016, 7 of the 136 Washington water systems serving towns on this site had at least one health-based violation (a contaminant or disinfectant above its legal limit, or a required treatment step not met), 43 in total; 0 are still open. 76 of 79 towns with a main water system had none.

Towns with the most health-based violations in Washington

TownWater systemViolationsOpenMost commonMost recent
Walla WallaWalla Walla Water Division36— Surface water treatment (Long Term 2 rule); Surface Water Treatment RuleDec 2018
LyndenLynden Water Department1— Surface water treatment (filtration/turbidity)Dec 2023
GrandviewCity of Grandview1— NitrateJan 2020

Monitoring and reporting violations (missed or late tests) are listed on each town's page. Source: EPA ECHO / SDWIS (2026Q3) · Methodology

Hardest water in Washington

  1. Oak Harbor289 mg/L
  2. Pasco278 mg/L
  3. Richland220 mg/L
  4. Sunnyside207 mg/L
  5. Moses Lake196 mg/L
  6. Kennewick134 mg/L
  7. Lynden134 mg/L
  8. Ferndale132 mg/L
  9. Bellingham120 mg/L
  10. Pullman114 mg/L

Softest water in Washington

  1. Mount Vernon9 mg/L
  2. Anacortes9 mg/L
  3. Sedro-Woolley9 mg/L
  4. Burlington9 mg/L
  5. Centralia15 mg/L
  6. Longview16 mg/L
  7. Kelso16 mg/L
  8. Spokane Valley22 mg/L
  9. Liberty Lake22 mg/L
  10. Cheney24 mg/L

All 39 counties in Washington

CountyMedian mg/LgpgClassSites
Adams County 233 13.6 Very hard 11
Asotin County 96 5.6 Moderately hard 2
Benton County 67 3.9 Moderately hard 10
Chelan County 10 0.6 Soft 2
Clallam County 51 3 Soft 3
Clark County 51 3 Soft 8
Columbia County — — No data 0
Cowlitz County 16 0.9 Soft 3
Douglas County 68 4 Moderately hard 14
Ferry County 106 6.2 Moderately hard 13
Franklin County 240 14 Very hard 29
Garfield County 114 6.7 Moderately hard 2
Grant County 176 10.3 Hard 65
Grays Harbor County — — No data 0
Island County 289 16.9 Very hard 1
Jefferson County 25 1.5 Soft 3
King County 61 3.6 Moderately hard 34
Kitsap County 88 5.1 Moderately hard 74
Kittitas County 44 2.6 Soft 23
Klickitat County 63 3.7 Moderately hard 12
Lewis County 15 0.9 Soft 2
Lincoln County 178 10.4 Hard 9
Mason County 40 2.3 Soft 44
Okanogan County 94 5.5 Moderately hard 76
Pacific County 16 0.9 Soft 1
Pend Oreille County — — No data 0
Pierce County 51 3 Soft 73
San Juan County 163 9.5 Hard 3
Skagit County 9 0.5 Soft 8
Skamania County 62 3.6 Moderately hard 5
Snohomish County 31 1.8 Soft 99
Spokane County 24 1.4 Soft 37
Stevens County 73 4.3 Moderately hard 15
Thurston County 58 3.4 Soft 18
Wahkiakum County — — No data 0
Walla Walla County 66 3.8 Moderately hard 6
Whatcom County 125 7.3 Hard 104
Whitman County 114 6.7 Moderately hard 13
Yakima County 178 10.4 Hard 68

Cities and towns in Washington A–Z

A

C

D

F

G

H

I

K

N

O

P

R

S

T

V

Y

Smaller communities are listed on their county page.