Water hardness in Kennewick, WA

Water in Kennewick is hard, with a median of 134 mg/L (7.8 grains per gallon) across 6 monitoring sites within 10 miles.

81% harder than the Washington median (74 mg/L) 6th hardest of 122 Washington towns Population 85,158
134mg/L
7.8 grains per gallon
Hard

Kennewick tap water at a glance

  • HardnessHard (134 mg/L, 7.8 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
  • PFAS6 found; the highest PFOS and PFHxS and PFOA result was above EPA's 4 ppt limit (a single result is not a violation).Filters that remove PFAS →
  • Lead pipesNo lead service lines reported.Details →
  • ViolationsNo health-based violations since 2016.EPA record →

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 134 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 7.8 gpg (7.5 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites6
Lab samples52
Sample years2000–2014
Middle 50% of sites66–264 mg/L
Groundwater (wells, springs)243 mg/L · 4 sites
Surface water (rivers, lakes)60 mg/L · 2 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Kennewick

Prefilled with Kennewick's measured local hardness of 134 mg/L (7.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Kennewick tap water

City of Kennewick is the main public water system for Kennewick. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Feb 2023 – Jan 2024. 6 PFAS were detected. The highest PFOS and PFHxS and PFOA results were above EPA's drinking water limit (4 ppt / 10 ppt).

ChemicalHighest resultDetected inEPA limit
PFOS
perfluorooctane sulfonic acid
11.5 ppt 4 of 8 samples 4 ppt
PFHxS
perfluorohexane sulfonic acid
10.6 ppt 4 of 8 samples 10 ppt*
PFPeA
perfluoropentanoic acid
7.5 ppt 4 of 8 samples —
PFHxA
perfluorohexanoic acid
6.5 ppt 4 of 8 samples —
PFBS
perfluorobutane sulfonic acid
6.4 ppt 4 of 8 samples —
PFOA
perfluorooctanoic acid
4.6 ppt 2 of 8 samples 4 ppt

Other water systems serving parts of Kennewick

Water systemPFAS detectedHighest PFOA / PFOSTested
City of Richland
serves over 10,000 people
PFOS, PFPeA, PFHxA +5 more 10.1 / 17 ppt Mar 2023 – Dec 2023

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Kennewick

City of Kennewick reported 24,155 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
24,155not lead (100%)

Other water systems serving parts of Kennewick

Water systemService linesTotal
City of RichlandNot reported—

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Kennewick drinking water violations

EPA records show no health-based violations for City of Kennewick since 2016. It also had 5 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Kennewick

Water systemHealth-based violationsMonitoring/reporting
City of RichlandNone25

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Kennewick

SiteTypeDistanceMedianSamplesYears
09N/30E-27L02 SU82
USGS Washington Water Science Center
Well 6.5 mi200 mg/L12002
08N/28E-09F01
USGS Washington Water Science Center
Well 6.8 mi68 mg/L12001
09N/30E-16D01 PN94
USGS Washington Water Science Center
Well 7 mi286 mg/L22002–2014
09N/29E-02G07 SU78
USGS Washington Water Science Center
Well 7.1 mi339 mg/L22002–2014
SNAKE RIVER AT BURBANK, WA
USGS Washington Water Science Center
Stream 7.4 mi55 mg/L102000
COLUMBIA RIVER AT RICHLAND, WA
USGS Washington Water Science Center
Stream 8.9 mi65 mg/L362000–2010

Water hardness in towns near Kennewick

TownDistanceMedianClass
Pasco5 mi 278 mg/LVery hard
Richland8 mi 220 mg/LVery hard
West Richland13 mi 87 mg/LModerately hard
Grandview35 mi 103 mg/LModerately hard
Sunnyside40 mi 207 mg/LVery hard
Walla Walla41 mi 58 mg/LSoft
Moses Lake64 mi 196 mg/LVery hard
Yakima71 mi 47 mg/LSoft
Ellensburg86 mi 44 mg/LSoft
East Wenatchee99 mi 67 mg/LModerately hard

Benton County

Kennewick is in Benton County, where the median is 67 mg/L (moderately hard) across 10 sites.

See all of Benton County →

Washington

The statewide median is 74 mg/L (moderately hard) from 890 sites.

Washington hardness map →

Kennewick, WA water: common questions

Do I need a water softener in Kennewick?

Many homes here use one. Water measured around Kennewick is 7.8 gpg (134 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 14,000 grains.Size it for your household →

Who supplies Kennewick's drinking water?

The main public water system serving Kennewick in EPA records is City of Kennewick. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Kennewick?

It depends on what you want to remove. In Kennewick, EPA testing found PFOS, PFHxS and PFPeA and 3 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next