Water hardness in Richland, WA
Water in Richland is very hard, with a median of 220 mg/L (12.9 grains per gallon) across 12 monitoring sites within 10 miles.
Richland tap water at a glance
- HardnessVery hard (220 mg/L, 12.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS8 found; the highest PFOS and PFOA result was above EPA's 4 ppt limit (a single result is not a violation).Filters that remove PFAS →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 220 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 12.9 gpg (12.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Richland
Prefilled with Richland's measured local hardness of 220 mg/L (12.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Richland tap water
City of Richland is the main public water system for Richland. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 10 samples taken Mar 2023 – Dec 2023. 8 PFAS were detected. The highest PFOS and PFOA results were above EPA's drinking water limit (4 ppt).
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFOS perfluorooctane sulfonic acid | 17 ppt | 2 of 10 samples | 4 ppt |
| PFPeA perfluoropentanoic acid | 14.5 ppt | 2 of 10 samples | — |
| PFHxA perfluorohexanoic acid | 11.6 ppt | 2 of 10 samples | — |
| PFOA perfluorooctanoic acid | 10.1 ppt | 2 of 10 samples | 4 ppt |
| PFBS perfluorobutane sulfonic acid | 8.9 ppt | 2 of 10 samples | — |
| PFBA perfluorobutanoic acid | 6.6 ppt | 1 of 10 samples | — |
| PFHpA perfluoroheptanoic acid | 5.8 ppt | 1 of 10 samples | — |
| PFHxS perfluorohexane sulfonic acid | 5.4 ppt | 2 of 10 samples | 10 ppt* |
Other water systems serving parts of Richland
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| City of Kennewick serves over 10,000 people | PFOS, PFHxS, PFPeA +3 more | 4.6 / 11.5 ppt | Feb 2023 – Jan 2024 |
| City of West Richland serves over 10,000 people | None detected | — | Feb 2024 – Oct 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Richland
City of Richland has not yet reported its service line inventory to EPA (as of the first quarter of 2026). Ask the utility whether your home's service line has been identified.
Other water systems serving parts of Richland
| Water system | Service lines | Total |
|---|---|---|
| City of Kennewick | 0 lead · 0 galvanized · 0 unknown | 24,155 |
| City of West Richland | 0 lead · 91 galvanized · 0 unknown | 223 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Richland drinking water violations
EPA records show no health-based violations for City of Richland since 2016. It also had 25 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Richland
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| City of Kennewick | None | 5 |
| City of West Richland | None | 3 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Richland
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| COLUMBIA RIVER AT RICHLAND, WA USGS Washington Water Science Center | Stream | 2.6 mi | 65 mg/L | 36 | 2000–2010 |
| 09N/27E-24N01 USGS Washington Water Science Center | Well | 5.1 mi | 30 mg/L | 1 | 2001 |
| 10N/29E-17Q01 PN106 USGS Washington Water Science Center | Well | 5.8 mi | 307 mg/L | 2 | 2002–2014 |
| 08N/28E-09F01 USGS Washington Water Science Center | Well | 6.3 mi | 68 mg/L | 1 | 2001 |
| 10N/29E-07R01 PN84 USGS Washington Water Science Center | Well | 6.5 mi | 318 mg/L | 9 | 2000–2014 |
| 10N/29E-06L01 ON99 USGS Washington Water Science Center | Well | 7.2 mi | 270 mg/L | 2 | 2002–2015 |
Water hardness in towns near Richland
| Town | Distance | Median | Class |
|---|---|---|---|
| West Richland | 5 mi | 87 mg/L | Moderately hard |
| Kennewick | 8 mi | 134 mg/L | Hard |
| Pasco | 8 mi | 278 mg/L | Very hard |
| Grandview | 30 mi | 103 mg/L | Moderately hard |
| Sunnyside | 34 mi | 207 mg/L | Very hard |
| Walla Walla | 48 mi | 58 mg/L | Soft |
| Moses Lake | 58 mi | 196 mg/L | Very hard |
| Yakima | 63 mi | 47 mg/L | Soft |
| Ellensburg | 77 mi | 44 mg/L | Soft |
| East Wenatchee | 91 mi | 67 mg/L | Moderately hard |
Benton County
Richland is in Benton County, where the median is 67 mg/L (moderately hard) across 10 sites.
See all of Benton County →Washington
The statewide median is 74 mg/L (moderately hard) from 890 sites.
Washington hardness map →Richland, WA water: common questions
Do I need a water softener in Richland?
Very likely. Water measured around Richland is 12.9 gpg (220 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 23,000 grains.Size it for your household →
Who supplies Richland's drinking water?
The main public water system serving Richland in EPA records is City of Richland. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Richland?
It depends on what you want to remove. In Richland, EPA testing found PFOS, PFPeA and PFHxA and 5 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 8 PFAS in Richland's main water system.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.