Water hardness in Kent, WA
Water in Kent is soft, with a median of 52 mg/L (3 grains per gallon) across 13 monitoring sites within 10 miles.
Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Kent can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.
Kent tap water at a glance
- HardnessSoft (52 mg/L, 3 gpg, local measurements). A water softener isn't needed.Water heater care →
- PFAS1 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesNo lead service lines reported.Details →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 52 mg/L means at home
- Water softener: A water softener is generally not needed. Soft water rarely causes scale.
- Dishwasher: set the water hardness to about 3 gpg (2.9 °dH), which is the lowest hardness setting (or softener off).
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Kent
Prefilled with Kent's measured local hardness of 52 mg/L (3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Kent tap water
Kent Water Department is the main public water system for Kent. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 14 samples taken Jan 2025 – Dec 2025. 1 PFAS was detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBS perfluorobutane sulfonic acid | 3.5 ppt | 2 of 14 samples | — |
Other water systems serving parts of Kent
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Soos Creek Water & Sewer District serves over 10,000 people | None detected | — | Mar 2025 – Nov 2025 |
| Covington Water District serves over 10,000 people | PFBS, PFOS, PFHxS +2 more | ND / 8.6 ppt | Jan 2024 – Nov 2024 |
| City OF Auburn serves over 10,000 people | PFBS | — | Nov 2024 – Nov 2025 |
| Cedar River Water & Sewer District serves over 10,000 people | PFBA | — | May 2023 – Sep 2024 |
| Lake Meridian Water District serves over 10,000 people | None detected | — | Apr 2024 – Jan 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Kent
Kent Water Department reported 15,886 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.
Other water systems serving parts of Kent
| Water system | Service lines | Total |
|---|---|---|
| Soos Creek Water & Sewer District | 0 lead · 246 galvanized · 0 unknown | 19,192 |
| Covington Water District | 0 lead · 0 galvanized · 242 unknown | 18,323 |
| City OF Auburn | 7 lead · 92 galvanized · 8,149 unknown | 15,504 |
| Cedar River Water & Sewer District | 0 lead · 0 galvanized · 0 unknown | 8,208 |
| Lake Meridian Water District | 0 lead · 6 galvanized · 179 unknown | 6,098 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Kent drinking water violations
EPA records show no health-based violations for Kent Water Department since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Kent
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Soos Creek Water & Sewer District | None | 0 |
| Covington Water District | None | 0 |
| City OF Auburn | None | 2 |
| Cedar River Water & Sewer District | None | 0 |
| Lake Meridian Water District | None | 4 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Kent
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| MILL CREEK AT EARTHWORKS PARK AT KENT, WA USGS Washington Water Science Center | Stream | 0.7 mi | 96 mg/L | 10 | 2015 |
| LITTLE SOOS CREEK ABV MOUTH NR MAPLE VALLEY USGS Washington Water Science Center | Stream | 4.6 mi | 23 mg/L | 10 | 2015 |
| JENKINS CREEK NEAR COVINGTION, WA USGS Washington Water Science Center | Stream | 5.2 mi | 61 mg/L | 10 | 2015 |
| BIG SOOS CREEK ABOVE HATCHERY NEAR AUBURN, WA USGS Washington Water Science Center | Stream | 5.7 mi | 58 mg/L | 10 | 2015 |
| MILL CREEK AT PEASLEY CANYON RD S NR AUBURN, WA USGS Washington Water Science Center | Stream | 6.3 mi | 76 mg/L | 10 | 2015 |
| 23N/05E-17F01 USGS Washington Water Science Center | Well | 6.5 mi | 51 mg/L | 1 | 2016 |
Water hardness in towns near Kent
| Town | Distance | Median | Class |
|---|---|---|---|
| Lakeland North | 5 mi | 61 mg/L | Moderately hard |
| Des Moines | 5 mi | 58 mg/L | Soft |
| Fairwood | 5 mi | 52 mg/L | Soft |
| Covington | 5 mi | 51 mg/L | Soft |
| SeaTac | 6 mi | 77 mg/L | Moderately hard |
| Auburn | 6 mi | 61 mg/L | Moderately hard |
| Renton | 6 mi | 56 mg/L | Soft |
| Lake Morton-Berrydale | 6 mi | 55 mg/L | Soft |
| Tukwila | 7 mi | 87 mg/L | Moderately hard |
| Bryn Mawr-Skyway | 8 mi | 87 mg/L | Moderately hard |
King County
Kent is in King County, where the median is 61 mg/L (moderately hard) across 34 sites.
See all of King County →Washington
The statewide median is 74 mg/L (moderately hard) from 890 sites.
Washington hardness map →Kent, WA water: common questions
Do I need a water softener in Kent?
Probably not. Water measured around Kent is 3 gpg (52 mg/L, measured locally), under the 7 gpg (120 mg/L) level where scale on fixtures and appliances becomes noticeable.When a softener helps →
Who supplies Kent's drinking water?
The main public water system serving Kent in EPA records is Kent Water Department. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Kent?
It depends on what you want to remove. In Kent, EPA testing found PFBS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Which water filters remove PFAS?EPA tests found 1 PFAS in Kent's main water system.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.