Water hardness in Whatcom County, WA

Water in Whatcom County is hard, with a median of 125 mg/L (7.3 grains per gallon) across 104 monitoring sites.

69% harder than the Washington median (74 mg/L) 8th hardest of 35 counties
125mg/L
7.3 grains per gallon
Hard

Whatcom County water at a glance

  • HardnessHard (125 mg/L, 7.3 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 125 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 7.3 gpg (7 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites104
Lab samples893
Sample years2000–2025
Middle 50% of sites82–170 mg/L
Groundwater (wells, springs)133 mg/L · 77 sites
Surface water (rivers, lakes)74 mg/L · 27 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Whatcom County

Prefilled with Whatcom County's measured local hardness of 125 mg/L (7.3 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Whatcom County on the Washington map

King CountyLincoln CountyPend Oreille CountyAsotin CountySkagit CountyFranklin CountyWhitman CountyYakima CountyClark CountyBenton CountyKittitas CountyWahkiakum CountyIsland CountyClallam CountyGrays Harbor CountyPacific CountySan Juan CountySpokane CountyDouglas CountyGrant CountySnohomish CountyOkanogan CountyFerry CountyCowlitz CountyMason CountyColumbia CountyAdams CountySkamania CountyJefferson CountyWalla Walla CountyPierce CountyChelan CountyGarfield CountyThurston CountyKlickitat CountyKitsap CountyLewis CountyStevens County

Cities and communities in Whatcom County

PlaceMedian mg/LClassBased on
Bellingham 120 Hard 27 sites within 10 miles
Lynden 134 Hard 66 sites within 10 miles
Ferndale 132 Hard 66 sites within 10 miles
Birch Bay (CDP) 110 Moderately hard 16 sites within 10 miles
Sudden Valley (CDP) 37 Soft 3 sites within 10 miles
Blaine 125 Hard county median
Marietta-Alderwood (CDP) 120 Hard 33 sites within 10 miles
Peaceful Valley (CDP) 169 Hard 13 sites within 10 miles
Everson 134 Hard 66 sites within 10 miles
Geneva (CDP) 66 Moderately hard 8 sites within 10 miles
Sumas 140 Hard 59 sites within 10 miles
Nooksack 134 Hard 66 sites within 10 miles
Point Roberts (CDP) 125 Hard county median
Custer (CDP) 95 Moderately hard 38 sites within 10 miles
Deming (CDP) 162 Hard 29 sites within 10 miles
Maple Falls (CDP) 125 Hard county median
Acme (CDP) 125 Hard county median
Glacier (CDP) 125 Hard county median
Kendall (CDP) 166 Hard 14 sites within 10 miles

Water quality in Whatcom County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Bellingham City of Bellingham-Water Division None detected 0 lead · 0 unknown None
Lynden Lynden Water Department None detected 0 lead · 0 unknown 1
Ferndale Ferndale None detected 0 lead · 0 unknown None
Birch Bay Birch Bay Water & Sewer District None detected 0 lead · 0 unknown None
Blaine City of Blaine None detected 0 lead · 1,729 unknown None
Everson City of Everson None detected 0 lead · 0 unknown None
Sumas Sumas Water Dept Not tested 0 lead · 86 unknown None
Nooksack Nooksack Water Dept Not tested 0 lead · 0 unknown None
Glacier Glacier Water District Not tested 0 lead · 0 unknown None

Neighboring counties

Washington

The statewide median is 74 mg/L (moderately hard) from 890 sites.

Washington hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next