How to test your well water
Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: test a private well every year for total coliform bacteria, nitrates, total dissolved solids and pH (EPA's recommendation), using a state-certified lab. Add tests for hardness, iron, lead or other substances based on what you notice and what is nearby, and test right away after flooding or nearby construction.
The yearly tests
About 43 million people in the US, roughly 15% of the population, drink water from private wells, according to EPA. EPA says private well owners are responsible for their own drinking water, and recommends these tests every year:
- Total coliform bacteria: a sign that germs may be getting into the well.
- Nitrates: from fertilizer, septic systems and manure; especially important for infants.
- Total dissolved solids (TDS): the overall mineral content.
- pH: acidic water can corrode pipes and release metals such as lead and copper.
Test more often if small children, older adults, or someone pregnant or nursing lives in the home.
What else to test for
EPA's checklist matches what you notice, or what is nearby, to the tests to add:
| If you notice or live near… | Test for |
|---|---|
| Scaly residue, soap doesn't lather | Hardness |
| Stained fixtures or laundry | Iron, copper, manganese (orange and black stains) |
| Old plumbing or a lead service line | pH, lead, copper |
| Corroding pipes, fast wear of treatment equipment | Corrosion, pH, lead |
| Recurring stomach illness | Coliform bacteria |
| Intensive farming nearby | Nitrate, nitrite, pesticides, coliform bacteria |
| Mining nearby | Metals, pH, corrosion |
| Gas drilling nearby | Chloride, sodium, barium, strontium |
| Landfill, factory, gas station or dry cleaner nearby | Volatile organic compounds, TDS, pH, sulfate, chloride, metals |
| Salty taste, seawater or heavily salted road nearby | Chloride, TDS, sodium |
| Rotten-egg smell or bad taste | Hydrogen sulfide, corrosion, metals |
| Radon in indoor air or a radon-rich area | Radon |
| Cloudy, frothy or colored water | Color, detergents |
Where to get it tested
Use a laboratory certified for drinking water testing in your state. Your local health department can point you to one and may test private wells for free. Make sure the report lists the concentration of each substance and compares it with EPA drinking water standards. If something is above a health standard, contact your health department and retest to confirm.
Groundwater hardness by state
Well water is usually harder than city water, because groundwater picks up calcium and magnesium from rock. Median hardness of groundwater samples (wells and springs) in our data, from the Water Quality Portal:
| State | Groundwater median | Class | Sites |
|---|---|---|---|
| Ohio | 362 mg/L | Very hard | 532 |
| Montana | 350 mg/L | Very hard | 1,045 |
| Michigan | 346 mg/L | Very hard | 231 |
| Iowa | 345 mg/L | Very hard | 661 |
| Illinois | 338 mg/L | Very hard | 232 |
| Minnesota | 333 mg/L | Very hard | 283 |
| Indiana | 316 mg/L | Very hard | 194 |
| South Dakota | 308 mg/L | Very hard | 159 |
| Missouri | 303 mg/L | Very hard | 430 |
| Utah | 297 mg/L | Very hard | 1,687 |
| Wisconsin | 272 mg/L | Very hard | 253 |
| New Mexico | 264 mg/L | Very hard | 862 |
| Kansas | 262 mg/L | Very hard | 430 |
| North Dakota | 261 mg/L | Very hard | 243 |
| Nebraska | 241 mg/L | Very hard | 880 |
| Texas | 240 mg/L | Very hard | 1,128 |
| Florida | 228 mg/L | Very hard | 1,426 |
| Arizona | 220 mg/L | Very hard | 2,494 |
| Oklahoma | 213 mg/L | Very hard | 317 |
| Kentucky | 199 mg/L | Very hard | 43 |
| Colorado | 186 mg/L | Very hard | 1,177 |
| Wyoming | 170 mg/L | Hard | 579 |
| Idaho | 166 mg/L | Hard | 2,337 |
| California | 161 mg/L | Hard | 5,163 |
| New York | 151 mg/L | Hard | 1,323 |
| Nevada | 144 mg/L | Hard | 810 |
| Alaska | 122 mg/L | Hard | 35 |
| District of Columbia | 121 mg/L | Hard | 40 |
| Washington | 112 mg/L | Moderately hard | 553 |
| West Virginia | 108 mg/L | Moderately hard | 275 |
| Georgia | 107 mg/L | Moderately hard | 367 |
| Oregon | 104 mg/L | Moderately hard | 1,402 |
| Arkansas | 96 mg/L | Moderately hard | 733 |
| North Carolina | 94 mg/L | Moderately hard | 610 |
| Pennsylvania | 92 mg/L | Moderately hard | 1,061 |
| Connecticut | 84 mg/L | Moderately hard | 110 |
| Virginia | 84 mg/L | Moderately hard | 656 |
| Vermont | 80 mg/L | Moderately hard | 14 |
| New Hampshire | 77 mg/L | Moderately hard | 42 |
| Maryland | 72 mg/L | Moderately hard | 812 |
| Hawaii | 70 mg/L | Moderately hard | 74 |
| Mississippi | 65 mg/L | Moderately hard | 197 |
| New Jersey | 58 mg/L | Soft | 794 |
| Tennessee | 58 mg/L | Soft | 267 |
| Maine | 54 mg/L | Soft | 181 |
| Massachusetts | 51 mg/L | Soft | 200 |
| Delaware | 50 mg/L | Soft | 332 |
| Rhode Island | 45 mg/L | Soft | 7 |
| Louisiana | 38 mg/L | Soft | 558 |
| Alabama | 29 mg/L | Soft | 205 |
| South Carolina | 19 mg/L | Soft | 273 |
Hardness varies a lot from well to well, so only your own test tells you yours. If it's high, see whether you need a water softener. Many homes with wells also have septic systems: see how often to pump a septic tank.
In Canada? See well water testing in Canada (Health Canada and provincial advice).
Radon is common in some well water: see radon in well water.
Frequently asked questions
How often should well water be tested?
EPA recommends testing a private well every year for total coliform bacteria, nitrates, total dissolved solids and pH, and more often if small children, elderly adults, or someone pregnant or nursing lives in the home.
What should I test my well water for?
Start with EPA's yearly tests (coliform bacteria, nitrates, total dissolved solids, pH). Add others based on what you notice or what is nearby: for example hardness for scale, iron and manganese for stains, lead and copper for old plumbing, nitrate and pesticides near farms.
Where can I get my well water tested?
Use a laboratory certified for drinking water testing in your state. EPA notes your local health department may provide private well testing for free.
Who is responsible for private well water?
EPA says private well owners are responsible for delivering safe drinking water to their households. About 43 million people in the US, around 15% of the population, rely on private wells.
When should I test my well right away?
EPA says to test immediately if conditions near your well change significantly, such as flooding, land disturbance, or new construction or industrial activity nearby.