Water softener salt and sodium in softened water
Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: an ion exchange softener adds about 8 mg of sodium per liter for every grain per gallon of hardness it removes. At 10 gpg that's about 80 mg/L, or roughly 160 mg in two liters. If sodium matters to you, keep an unsoftened drinking tap or switch to potassium chloride.
Sodium in your softened water
Estimate using 8 mg/L of sodium per gpg removed (University of Nebraska–Lincoln Extension), on top of any sodium already in your water. FDA's Daily Value for sodium is less than 2,300 mg.
Sodium chloride vs potassium chloride
| Sodium chloride (salt) | Potassium chloride | |
|---|---|---|
| Adds to your water | Sodium | Potassium instead of sodium |
| Cost and availability | Lower cost, widely available | Costs more, can be harder to find |
| Amount needed | Standard | Can need more per regeneration (binds more strongly to the resin) |
| Good for | Most homes | Sodium-restricted diets or local sodium concerns; ask a water treatment professional |
Both discharge chloride when the softener regenerates, which is why some California communities restrict salt-based softeners. See salt-free vs salt-based softeners.
Which salt to buy
- Use what your softener's manual recommends.
- Rock salt only if the manufacturer allows it and its impurities are under about 1%; impurities can reduce regeneration and plug valves.
- Keep the brine tank topped up; a softener that isn't regenerated lets hard water through to your pipes and appliances.
Other tips
- Don't use softened water repeatedly on plants, lawns or gardens, because of the sodium.
- Not sure your hardness? Look up your town or use the hardness converter, then size your softener.
Frequently asked questions
How much sodium does a water softener add?
About 8 mg of sodium per liter for every grain per gallon of hardness removed, according to University of Nebraska–Lincoln Extension. Water that starts at 10 gpg ends up with about 80 mg/L of sodium.
Is potassium chloride better than salt for a water softener?
Potassium chloride avoids adding sodium, which can matter for health or environmental reasons. University of Nebraska–Lincoln Extension notes it costs more, can be harder to find and can take more product per regeneration. Check that your softener supports it.
Can I use rock salt in my water softener?
Only if the manufacturer suggests it, and only rock salt with less than about 1% impurities, according to University of Nebraska–Lincoln Extension. Impurities can reduce regeneration and plug valves.
How do I avoid sodium from softened water?
Many homes keep an unsoftened cold-water line to the kitchen tap for drinking and cooking, or use potassium chloride. People on a sodium-restricted diet should ask their doctor.