Water hardness in Saratoga County, NY
Water in Saratoga County is moderately hard, with a median of 114 mg/L (6.7 grains per gallon) across 60 monitoring sites.
Saratoga County water at a glance
- HardnessModerately hard (114 mg/L, 6.7 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 114 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 6.7 gpg (6.4 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Saratoga County
Prefilled with Saratoga County's measured local hardness of 114 mg/L (6.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Saratoga County on the New York map
Cities and communities in Saratoga County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Saratoga Springs | 114 | Moderately hard | 21 sites within 10 miles |
| Mechanicville | 138 | Hard | 31 sites within 10 miles |
| Ballston Spa | 173 | Hard | 24 sites within 10 miles |
| South Glens Falls | 136 | Hard | 14 sites within 10 miles |
| Milton (CDP) | 127 | Hard | 19 sites within 10 miles |
| Corinth | 62 | Moderately hard | 17 sites within 10 miles |
| Country Knolls (CDP) | 174 | Hard | 36 sites within 10 miles |
| Waterford | 171 | Hard | 31 sites within 10 miles |
| Stillwater | 150 | Hard | 20 sites within 10 miles |
| Schuylerville | 117 | Moderately hard | 16 sites within 10 miles |
| North Ballston Spa (CDP) | 150 | Hard | 23 sites within 10 miles |
| Hadley (CDP) | 20 | Soft | 16 sites within 10 miles |
| Round Lake | 161 | Hard | 33 sites within 10 miles |
| Victory | 111 | Moderately hard | 13 sites within 10 miles |
| Galway | 134 | Hard | 16 sites within 10 miles |
| Clifton Gardens (CDP) | 164 | Hard | 36 sites within 10 miles |
| Clifton Knolls-Mill Creek (CDP) | 173 | Hard | 39 sites within 10 miles |
Water quality in Saratoga County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Saratoga Springs | Saratoga Springs City | 2 found | 88 lead · 2,527 unknown | None |
| Mechanicville | Mechanicville City | None detected | 11 lead · 1,277 unknown | 6 |
| Ballston Spa | Ballston Spa Village | None detected | 0 lead · 911 unknown | None |
| South Glens Falls | South Glens Falls Village | None detected | 0 lead · 1,105 unknown | 1 |
| Corinth | Corinth Village | None detected | 0 lead · 103 unknown | 2 |
Neighboring counties
- Schenectady County216 mg/L
- Washington County158 mg/L
- Fulton County37 mg/L
- Warren County30 mg/L
- Rensselaer County115 mg/L
- Montgomery County334 mg/L
New York
The statewide median is 77 mg/L (moderately hard) from 2,847 sites.
New York hardness map →Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.