Why are my glasses cloudy from the dishwasher?
Updated November 21, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: cloudy glasses are either coated with a hard water film or etched. Film is a mineral deposit that forms when detergent meets hard water; it comes off with white vinegar and can be prevented. Etching is corrosion of the glass itself, linked to soft water, long hot cycles and poor-quality glass, and it is permanent, according to the detergent maker Finish.
Film or etching? How to tell
| Hard water film | Etching (glass corrosion) | |
|---|---|---|
| What it is | Mineral deposit on the surface | Damage to the glass surface |
| Main causes | Detergent combining with water hardness (Cascade) | Soft water, long cycles, heat, poor-quality glass (Finish) |
| Wipe or soak in white vinegar | Comes clean | Stays cloudy |
| Can it be fixed? | Yes, and prevented | No: Finish calls the damage irreversible |
Remove hard water film
Cascade's vinegar wash, for non-metal items:
- Load the glasses (no metal items) and put 2 cups of white vinegar in a bowl on the bottom rack.
- Run a normal cycle without detergent.
- Run another cycle with dishwasher cleaner or detergent to finish.
Prevent cloudy glasses
- Use rinse aid. Finish says it helps water droplets disperse, so minerals don't dry onto the glass.
- Dose detergent properly. Cascade advises filling the detergent cups completely and washing with water of at least 120°F (49°C).
- Set the dishwasher for your water. Many dishwashers have a water hardness or built-in softener setting. Set it to your local hardness; Finish warns not to set the softener too high, because over-softened water can corrode glass.
- Protect good glassware. Finish suggests a lower temperature or a delicate or glass setting for delicate glass.
Find your water hardness
Look up your town on the US water hardness map or the Canada map: every town page shows the dishwasher setting in grains per gallon and °dH. To convert other units, use the water hardness converter. Hard water also affects laundry and leaves limescale on fixtures.
Frequently asked questions
Why are my glasses cloudy from the dishwasher?
Usually one of two things. A white film of hard water minerals, which detergent maker Cascade calls one of the leading causes of cloudy film, or glass corrosion (etching), which Finish links to soft water, long hot cycles and poor-quality glass.
How do I tell hard water film from etching?
Hard water film is a mineral deposit, so an acid such as white vinegar removes it and the glass comes clean. Etching is damage to the glass surface itself; Finish says it is irreversible, so vinegar won't change it.
How do I remove hard water film from glasses?
Cascade recommends a vinegar wash: put 2 cups of white vinegar in a bowl on the bottom rack, run a cycle without detergent, then wash again normally. Use it only for non-metal items.
How do I stop glasses going cloudy?
Use rinse aid, fill the detergent cups fully, set the dishwasher's water hardness or softener setting to match your local water, and wash delicate glass at a lower temperature or on a glass setting.