Water hardness in Yates County, NY

Water in Yates County is very hard, with a median of 368 mg/L (21.5 grains per gallon) across 7 monitoring sites.

378% harder than the New York median (77 mg/L) 2nd hardest of 60 counties
368mg/L
21.5 grains per gallon
Very hard

Yates County water at a glance

  • HardnessVery hard (368 mg/L, 21.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 368 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 21.5 gpg (20.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites7
Lab samples7
Sample years2007–2022
Middle 50% of sites301–414 mg/L
Groundwater (wells, springs)368 mg/L · 7 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Yates County

Prefilled with Yates County's measured local hardness of 368 mg/L (21.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Yates County on the New York map

Suffolk CountyCortland CountySchenectady CountyGenesee CountyChenango CountyWyoming CountyChemung CountyLivingston CountyWashington CountyKings CountyWayne CountyOswego CountyOntario CountyLewis CountySteuben CountyChautauqua CountyCattaraugus CountyMonroe CountyAlbany CountyAllegany CountyMontgomery CountyUlster CountySeneca CountyEssex CountyCayuga CountyColumbia CountyDutchess CountyHerkimer CountyOtsego CountyRockland CountyRensselaer CountyWarren CountySaratoga CountyDelaware CountyRichmond CountySt. Lawrence CountyMadison CountySchoharie CountyOneida CountyTompkins CountyFranklin CountySullivan CountyBroome CountyTioga CountyNew York CountyJefferson CountyNassau CountyPutnam CountyQueens CountySchuyler CountyOrleans CountyBronx CountyGreene CountyFulton CountyClinton CountyHamilton CountyOrange CountyOnondaga CountyErie CountyWestchester CountyNiagara County

Cities and communities in Yates County

PlaceMedian mg/LClassBased on
Penn Yan 341 Very hard 6 sites within 10 miles
Dundee 287 Very hard 7 sites within 10 miles
Keuka Park (CDP) 314 Very hard 7 sites within 10 miles
Dresden 339 Very hard 4 sites within 10 miles

Water quality in Yates County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Penn Yan Penn Yan Village 1 found 57 lead · 965 unknown None
Dundee Dundee Village Not tested 0 lead · 384 unknown None
Keuka Park Keuka Park WD Not tested 0 lead · 0 unknown None
Dresden Dresden Village Not tested 0 lead · 178 unknown 2

Neighboring counties

New York

The statewide median is 77 mg/L (moderately hard) from 2,847 sites.

New York hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next