Water hardness in Cortland County, NY
Water in Cortland County is hard, with a median of 170 mg/L (9.9 grains per gallon) across 33 monitoring sites.
Cortland County water at a glance
- HardnessHard (170 mg/L, 9.9 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 170 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 9.9 gpg (9.5 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Cortland County
Prefilled with Cortland County's measured local hardness of 170 mg/L (9.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Cortland County on the New York map
Cities and communities in Cortland County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Cortland | 209 | Very hard | 33 sites within 10 miles |
| Homer | 209 | Very hard | 29 sites within 10 miles |
| Munsons Corners (CDP) | 186 | Very hard | 49 sites within 10 miles |
| Cortland West (CDP) | 198 | Very hard | 44 sites within 10 miles |
| McGraw | 201 | Very hard | 27 sites within 10 miles |
| Marathon | 124 | Hard | 12 sites within 10 miles |
| Blodgett Mills (CDP) | 189 | Very hard | 35 sites within 10 miles |
| Virgil (CDP) | 186 | Very hard | 49 sites within 10 miles |
Water quality in Cortland County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Cortland | Cortland (C) | None detected | 0 lead · 0 unknown | None |
| McGraw | Mcgraw Village | Not tested | 0 lead · 38 unknown | None |
| Marathon | Marathon Village | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Tompkins County170 mg/L
- Chenango County122 mg/L
- Onondaga County326 mg/L
- Madison County200 mg/L
- Tioga County111 mg/L
- Broome County108 mg/L
New York
The statewide median is 77 mg/L (moderately hard) from 2,847 sites.
New York hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.