Water hardness in Wayne County, NY

Water in Wayne County is very hard, with a median of 344 mg/L (20.1 grains per gallon) across 15 monitoring sites.

347% harder than the New York median (77 mg/L) 3rd hardest of 60 counties
344mg/L
20.1 grains per gallon
Very hard

Wayne County water at a glance

  • HardnessVery hard (344 mg/L, 20.1 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 344 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 20.1 gpg (19.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites15
Lab samples54
Sample years2002–2022
Middle 50% of sites281–398 mg/L
Groundwater (wells, springs)360 mg/L · 11 sites
Surface water (rivers, lakes)313 mg/L · 4 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Wayne County

Prefilled with Wayne County's measured local hardness of 344 mg/L (20.1 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Wayne County on the New York map

Suffolk CountyCortland CountySchenectady CountyGenesee CountyChenango CountyYates CountyWyoming CountyChemung CountyLivingston CountyWashington CountyKings CountyOswego CountyOntario CountyLewis CountySteuben CountyChautauqua CountyCattaraugus CountyMonroe CountyAlbany CountyAllegany CountyMontgomery CountyUlster CountySeneca CountyEssex CountyCayuga CountyColumbia CountyDutchess CountyHerkimer CountyOtsego CountyRockland CountyRensselaer CountyWarren CountySaratoga CountyDelaware CountyRichmond CountySt. Lawrence CountyMadison CountySchoharie CountyOneida CountyTompkins CountyFranklin CountySullivan CountyBroome CountyTioga CountyNew York CountyJefferson CountyNassau CountyPutnam CountyQueens CountySchuyler CountyOrleans CountyBronx CountyGreene CountyFulton CountyClinton CountyHamilton CountyOrange CountyOnondaga CountyErie CountyWestchester CountyNiagara County

Cities and communities in Wayne County

PlaceMedian mg/LClassBased on
Newark 345 Very hard 10 sites within 10 miles
Lyons (CDP) 345 Very hard 12 sites within 10 miles
Palmyra 400 Very hard 6 sites within 10 miles
Williamson (CDP) 319 Very hard 7 sites within 10 miles
Ontario (CDP) 424 Very hard 3 sites within 10 miles
Clyde 353 Very hard 10 sites within 10 miles
Sodus 280 Very hard 7 sites within 10 miles
Wolcott 282 Very hard 9 sites within 10 miles
Macedon (CDP) 424 Very hard 7 sites within 10 miles
Marion (CDP) 384 Very hard 6 sites within 10 miles
Sodus Point 261 Very hard 6 sites within 10 miles
Pultneyville (CDP) 344 Very hard county median
North Rose (CDP) 282 Very hard 9 sites within 10 miles
Savannah (CDP) 372 Very hard 11 sites within 10 miles
Red Creek 202 Very hard 4 sites within 10 miles
Gananda (CDP) 466 Very hard 14 sites within 10 miles
Walworth (CDP) 464 Very hard 6 sites within 10 miles

Water quality in Wayne County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Newark Newark Village None detected 0 lead · 2,704 unknown None
Palmyra Palmyra Village None detected 0 lead · 0 unknown None
Williamson Williamson Town WD None detected 2 lead · 599 unknown None
Clyde Clyde Village Not tested 5 lead · 29 unknown None
Sodus Sodus Village Not tested 0 lead · 171 unknown None
Wolcott Wolcott Village Not tested 0 lead · 0 unknown None
Sodus Point Sodus Point Village Not tested 1 lead · 878 unknown None
Red Creek Red Creek Village Not tested 0 lead · 122 unknown 1

Neighboring counties

New York

The statewide median is 77 mg/L (moderately hard) from 2,847 sites.

New York hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next