How to remove hard water stains and limescale
Updated November 21, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: hard water stains and limescale are calcium carbonate left behind by hard water. They dissolve in a mild acid such as white vinegar or citric acid: soak or wipe the deposit, give it time, then rinse. Never combine an acid with bleach: Poison Control warns the mix can release chlorine gas.
Why hard water leaves stains
USGS describes hardness as the amount of dissolved calcium and magnesium in water. When hard water dries on a surface, or is heated in a kettle, coffee maker or water heater, those minerals are left behind as a white or chalky crust (calcium carbonate, often called limescale). The harder your water, the faster it builds up.
Where it builds up and what to do
| Where | What you see | How to clean it |
|---|---|---|
| Kettle | White flakes, crust on the element or base | Fill partly with a vinegar or citric acid solution, let it work, empty and rinse well; boil and discard a kettle of clean water before use. |
| Coffee maker | Slow brewing, crust in the reservoir | Run a vinegar solution through a brew cycle (USGS mentions this), then several cycles of clean water. Follow the maker's descaling instructions. |
| Showerhead and aerators | Blocked or uneven spray, weak flow | Unscrew and soak the head or aerator in vinegar, brush the holes, rinse. Blocked holes are a common cause of low water pressure. |
| Faucets, glass, shower screens | Cloudy spots, white crust | Wipe or cover with a cloth soaked in vinegar, wait, wipe off and rinse; dry the surface afterwards. |
| Toilet bowl | Ring at the water line | Use an acid toilet cleaner or vinegar on its own. Never add bleach to it. |
Test on a small area first: acids can damage natural stone such as marble, and some finishes. Check the manufacturer's care instructions for appliances and fixtures.
Safety: one rule that matters
Poison Control warns that mixing household cleaners can create dangerous fumes, and that bleach mixed with an acid, such as vinegar or an acidic toilet bowl cleaner, can produce chlorine gas. Use one product at a time, rinse between products and keep the room ventilated.
How hard is your water?
USGS classes water as soft up to 60 mg/L, moderately hard at 61–120, hard at 121–180 and very hard above 180 mg/L (as calcium carbonate). Look up your town on the US water hardness map or the Canada map. In hard and very hard areas, deposits come back quickly; a water softener treats the cause rather than the stains (see do I need a water softener?). Scale also affects bigger appliances: washing machines and water heaters.
Frequently asked questions
What are hard water stains?
They are mineral deposits, mostly calcium carbonate, left when hard water evaporates or is heated. USGS explains that hard water carries dissolved calcium and magnesium, and that heating it forms solid calcium carbonate deposits (scale).
What removes hard water stains?
A mild acid. Mineral scale dissolves in acids such as white vinegar or citric acid; USGS notes that people run vinegar through coffee pots for exactly this reason. Soak or wipe the deposit, give it time to work, then rinse with clean water.
Can I mix vinegar and bleach to clean limescale?
No. Poison Control warns that mixing bleach with an acid, such as vinegar or an acidic toilet bowl cleaner, can release chlorine gas. Use one product at a time and rinse in between.
How do I stop hard water stains coming back?
Wipe wet surfaces dry, descale appliances regularly, and check how hard your water is. In very hard water areas a water softener removes the calcium and magnesium that cause the deposits.