What temperature should a water heater be set at?

Updated November 21, 2026 · Based on EPA and other public sources listed below · How we make our content

Short answer: for most homes, 120°F (49°C) is enough. University of Maryland Extension says that setting can cut water-heating energy use by 6–10% and lowers the risk of scalding and mineral buildup. CDC's Legionella guidance for building water systems stores hot water above 140°F (60°C), which is why some heaters ship at a higher setting.

Temperature settings compared

Setting°CWhat the sources say
120°F49°CSufficient for most households; saves 6–10% of water-heating energy; less scalding and mineral buildup (UMD Extension). Also CDC's minimum for circulating hot water in buildings.
140°F60°CCDC: store hot water above this in building water systems to control Legionella.
77–113°F25–45°CCDC: the range where Legionella grows best (it can grow as low as 68°F / 20°C).

120°F or 140°F?

The two numbers answer different questions. 120°F balances energy use, scald risk and scale for a typical home. 140°F is CDC's storage temperature for controlling Legionella in buildings with large plumbing systems, such as hospitals and hotels. If someone in your home has a weakened immune system or a chronic lung condition, ask a doctor or plumber whether a higher storage temperature with anti-scald (mixing) valves at the taps makes sense.

Hard water: another reason not to overheat

Scale forms faster in hotter water, and UMD Extension lists reduced mineral buildup as a benefit of 120°F. If your water is hard, a lower setting plus yearly flushing protects the tank; see hard water and your water heater and check your town on the water hardness map.

How to change the setting

Most tank heaters have a dial on the gas control valve or a thermostat behind a cover panel on electric models; turn off the power before opening an electric heater's panel. Dials are often marked with words rather than degrees, so check the result at a tap with a thermometer after a few hours. If your heater is leaking from the relief valve, see why a water heater leaks: excessive temperature is one cause.

Australia, New Zealand and Canada set their own storage and delivery temperatures in building rules; we will add them once confirmed from the official sources.

Frequently asked questions

What temperature should I set my water heater to?

University of Maryland Extension says 120°F (49°C) is sufficient for most households and can reduce water-heating energy use by 6 to 10 percent, while lowering the risk of scalding and slowing mineral buildup.

Is 120°F hot enough to prevent Legionella?

CDC's guidance for building water systems is to store hot water above 140°F (60°C) and keep circulating hot water above 120°F (49°C), because Legionella grows best between 77°F and 113°F (25–45°C). That guidance is written for larger buildings; ask your doctor or a plumber about a higher setting if someone in the home is at higher risk.

What is 120°F in Celsius?

120°F is about 49°C, and 140°F is 60°C.

Does a lower setting reduce scale?

Yes. University of Maryland Extension notes that 120°F reduces mineral buildup. Scale forms faster at higher temperatures, which matters most in hard water areas.

Sources

Related guides