Water hardness in Allegany County, MD

Water in Allegany County is very hard, with a median of 210 mg/L (12.3 grains per gallon) across 11 monitoring sites.

275% harder than the Maryland median (56 mg/L) 2nd hardest of 24 counties
210mg/L
12.3 grains per gallon
Very hard

Allegany County water at a glance

  • HardnessVery hard (210 mg/L, 12.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 210 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 12.3 gpg (11.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites11
Lab samples148
Sample years2000–2022
Middle 50% of sites128–263 mg/L
Groundwater (wells, springs)227 mg/L · 9 sites
Surface water (rivers, lakes)120 mg/L · 2 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Allegany County

Prefilled with Allegany County's measured local hardness of 210 mg/L (12.3 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Allegany County on the Maryland map

Washington CountyQueen Anne's CountyCharles CountyAnne Arundel CountyGarrett CountySt. Mary's CountySomerset CountyCaroline CountyWicomico CountyCecil CountyHarford CountyBaltimore cityDorchester CountyCalvert CountyBaltimore CountyCarroll CountyFrederick CountyMontgomery CountyWorcester CountyHoward CountyPrince George's CountyKent CountyTalbot County

Cities and communities in Allegany County

PlaceMedian mg/LClassBased on
Cumberland 278 Very hard 3 sites within 10 miles
Frostburg 58 Soft 8 sites within 10 miles
Cresaptown (CDP) 202 Very hard 7 sites within 10 miles
La Vale (CDP) 160 Hard 6 sites within 10 miles
Potomac Park (CDP) 214 Very hard 6 sites within 10 miles
Westernport 132 Hard 7 sites within 10 miles
Bel Air (CDP) 147 Hard 6 sites within 10 miles
Bowling Green (CDP) 214 Very hard 6 sites within 10 miles
Lonaconing 74 Moderately hard 10 sites within 10 miles
Eckhart Mines (CDP) 63 Moderately hard 7 sites within 10 miles
Mount Savage (CDP) 227 Very hard 5 sites within 10 miles
Rawlings (CDP) 214 Very hard 4 sites within 10 miles
Bowmans Addition (CDP) 278 Very hard 3 sites within 10 miles
Ellerslie (CDP) 278 Very hard 3 sites within 10 miles
McCoole (CDP) 171 Hard 4 sites within 10 miles
Midland 113 Moderately hard 10 sites within 10 miles
Barton 85 Moderately hard 11 sites within 10 miles
Corriganville (CDP) 227 Very hard 5 sites within 10 miles
Grahamtown (CDP) 58 Soft 8 sites within 10 miles
Zihlman (CDP) 58 Soft 8 sites within 10 miles
Pleasant Grove (CDP) 210 Very hard county median
Midlothian (CDP) 74 Moderately hard 10 sites within 10 miles
Franklin (CDP) 132 Hard 7 sites within 10 miles
Danville (CDP) 214 Very hard 4 sites within 10 miles
Moscow (CDP) 85 Moderately hard 11 sites within 10 miles
Shaft (CDP) 74 Moderately hard 10 sites within 10 miles
Flintstone (CDP) 244 Very hard 4 sites within 10 miles
Bier (CDP) 202 Very hard 5 sites within 10 miles
Carlos (CDP) 74 Moderately hard 10 sites within 10 miles
Vale Summit (CDP) 63 Moderately hard 7 sites within 10 miles
Gilmore (CDP) 113 Moderately hard 10 sites within 10 miles
Klondike (CDP) 74 Moderately hard 12 sites within 10 miles
Nikep (CDP) 63 Moderately hard 11 sites within 10 miles
Woodland (CDP) 113 Moderately hard 10 sites within 10 miles
Dawson (CDP) 202 Very hard 3 sites within 10 miles
Oldtown (CDP) 92 Moderately hard 3 sites within 10 miles
Luke 132 Hard 7 sites within 10 miles
Barrelville (CDP) 227 Very hard 5 sites within 10 miles
Clarysville (CDP) 63 Moderately hard 7 sites within 10 miles
Detmold (CDP) 63 Moderately hard 11 sites within 10 miles
National (CDP) 113 Moderately hard 10 sites within 10 miles
Spring Gap (CDP) 92 Moderately hard 3 sites within 10 miles
Little Orleans (CDP) 115 Moderately hard 6 sites within 10 miles
Ocean (CDP) 113 Moderately hard 10 sites within 10 miles

Water quality in Allegany County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Cumberland City of Cumberland None detected 0 lead · 8,916 unknown None
Frostburg City of Frostburg None detected 0 lead · 0 unknown None
Westernport Town of Westernport Not tested 0 lead · 1,093 unknown 2
Luke Town of Luke Not tested 0 lead · 0 unknown None
Barrelville Barrelville Not tested Not reported 1 (1 open)
Ocean Town of Ocean City None detected 0 lead · 1,757 unknown 1

Neighboring counties

Maryland

The statewide median is 56 mg/L (soft) from 1,412 sites.

Maryland hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next