Water hardness in Baltimore County, MD

Water in Baltimore County is hard, with a median of 154 mg/L (9 grains per gallon) across 198 monitoring sites.

175% harder than the Maryland median (56 mg/L) 4th hardest of 24 counties
154mg/L
9 grains per gallon
Hard

Baltimore County water at a glance

  • HardnessHard (154 mg/L, 9 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 154 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 9 gpg (8.6 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites198
Lab samples461
Sample years2000–2019
Middle 50% of sites65–268 mg/L
Groundwater (wells, springs)150 mg/L · 176 sites
Surface water (rivers, lakes)220 mg/L · 22 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Baltimore County

Prefilled with Baltimore County's measured local hardness of 154 mg/L (9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Baltimore County on the Maryland map

Washington CountyAllegany CountyQueen Anne's CountyCharles CountyAnne Arundel CountyGarrett CountySt. Mary's CountySomerset CountyCaroline CountyWicomico CountyCecil CountyHarford CountyBaltimore cityDorchester CountyCalvert CountyCarroll CountyFrederick CountyMontgomery CountyWorcester CountyHoward CountyPrince George's CountyKent CountyTalbot County

Cities and communities in Baltimore County

PlaceMedian mg/LClassBased on
Dundalk (CDP) 138 Hard 4 sites within 10 miles
Towson (CDP) 244 Very hard 128 sites within 10 miles
Catonsville (CDP) 71 Moderately hard 25 sites within 10 miles
Essex (CDP) 267 Very hard 92 sites within 10 miles
Woodlawn (CDP) 103 Moderately hard 30 sites within 10 miles
Randallstown (CDP) 70 Moderately hard 40 sites within 10 miles
Pikesville (CDP) 237 Very hard 135 sites within 10 miles
Parkville (CDP) 258 Very hard 117 sites within 10 miles
Owings Mills (CDP) 76 Moderately hard 54 sites within 10 miles
Carney (CDP) 248 Very hard 124 sites within 10 miles
Milford Mill (CDP) 78 Moderately hard 37 sites within 10 miles
Perry Hall (CDP) 248 Very hard 123 sites within 10 miles
Reisterstown (CDP) 78 Moderately hard 55 sites within 10 miles
Lochearn (CDP) 138 Hard 61 sites within 10 miles
Middle River (CDP) 262 Very hard 103 sites within 10 miles
Cockeysville (CDP) 216 Very hard 147 sites within 10 miles
Arbutus (CDP) 55 Soft 21 sites within 10 miles
Rosedale (CDP) 265 Very hard 101 sites within 10 miles
Rossville (CDP) 262 Very hard 107 sites within 10 miles
Overlea (CDP) 262 Very hard 109 sites within 10 miles
Mays Chapel (CDP) 216 Very hard 143 sites within 10 miles
Timonium (CDP) 217 Very hard 140 sites within 10 miles
White Marsh (CDP) 258 Very hard 114 sites within 10 miles
Garrison (CDP) 113 Moderately hard 72 sites within 10 miles
Edgemere (CDP) 75 Moderately hard 4 sites within 10 miles
Lansdowne (CDP) 68 Moderately hard 20 sites within 10 miles
Baltimore Highlands (CDP) 95 Moderately hard 15 sites within 10 miles
Bowleys Quarters (CDP) 83 Moderately hard 12 sites within 10 miles
Lutherville (CDP) 234 Very hard 133 sites within 10 miles
Hampton (CDP) 219 Very hard 136 sites within 10 miles
Kingsville (CDP) 229 Very hard 132 sites within 10 miles
Honeygo (CDP) 249 Very hard 121 sites within 10 miles

Neighboring counties

Maryland

The statewide median is 56 mg/L (soft) from 1,412 sites.

Maryland hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next