Water hardness in Salt Lake County, UT

Water in Salt Lake County is very hard, with a median of 369 mg/L (21.6 grains per gallon) across 381 monitoring sites.

44% harder than the Utah median (256 mg/L) 2nd hardest of 29 counties
369mg/L
21.6 grains per gallon
Very hard

Salt Lake County water at a glance

  • HardnessVery hard (369 mg/L, 21.6 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 369 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 21.6 gpg (20.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites381
Lab samples4,214
Sample years2000–2023
Middle 50% of sites281–506 mg/L
Groundwater (wells, springs)452 mg/L · 215 sites
Surface water (rivers, lakes)339 mg/L · 166 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Salt Lake County

Prefilled with Salt Lake County's measured local hardness of 369 mg/L (21.6 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Salt Lake County on the Utah map

Duchesne CountyCache CountySanpete CountySummit CountySan Juan CountyRich CountyWashington CountyIron CountyJuab CountyCarbon CountyEmery CountyGrand CountyTooele CountyWayne CountyUintah CountyGarfield CountyKane CountyBox Elder CountyMillard CountyWeber CountyWasatch CountyMorgan CountyDavis CountyBeaver CountyPiute CountyUtah CountySevier CountyDaggett County

Cities and communities in Salt Lake County

PlaceMedian mg/LClassBased on
Salt Lake City 363 Very hard 170 sites within 10 miles
West Valley City 176 Hard 184 sites within 10 miles
West Jordan 183 Very hard 183 sites within 10 miles
Sandy 349 Very hard 152 sites within 10 miles
South Jordan 404 Very hard 164 sites within 10 miles
Millcreek 344 Very hard 224 sites within 10 miles
Herriman 478 Very hard 89 sites within 10 miles
Taylorsville 370 Very hard 212 sites within 10 miles
Draper 316 Very hard 125 sites within 10 miles
Murray 356 Very hard 200 sites within 10 miles
Riverton 414 Very hard 144 sites within 10 miles
Kearns metro township 397 Very hard 200 sites within 10 miles
Midvale 364 Very hard 162 sites within 10 miles
Cottonwood Heights 346 Very hard 167 sites within 10 miles
Holladay 351 Very hard 207 sites within 10 miles
Magna metro township 373 Very hard 104 sites within 10 miles
South Salt Lake 350 Very hard 218 sites within 10 miles
Bluffdale 366 Very hard 109 sites within 10 miles
White City metro township 348 Very hard 152 sites within 10 miles
Lake Point 387 Very hard 131 sites within 10 miles
Granite (CDP) 266 Very hard 142 sites within 10 miles
Emigration Canyon metro township 352 Very hard 121 sites within 10 miles
Copperton metro township 472 Very hard 105 sites within 10 miles
Brighton 200 Very hard 103 sites within 10 miles
Alta 162 Hard 81 sites within 10 miles

Water quality in Salt Lake County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Salt Lake City Salt Lake City Water System 4 found (PFOA ND / PFOS 7.1 ppt) 120 lead · 31,866 unknown 1
West Jordan West Jordan City Water System 3 found 0 lead · 0 unknown None
Sandy Sandy City Water System None detected 0 lead · 0 unknown 1
South Jordan South Jordan City None detected 0 lead · 708 unknown None
Herriman Herriman City Municipal Water Department 2 found 0 lead · 147 unknown 1
Taylorsville Taylorsville-Bennion None detected 0 lead · 0 unknown None
Draper Draper City Water System None detected 0 lead · 0 unknown None
Murray Murray City Water System 7 found (PFOA 4 / PFOS ND ppt) 0 lead · 291 unknown None
Riverton Riverton City Water System None detected 0 lead · 0 unknown None
Midvale Midvale City Water System None detected 0 lead · 0 unknown None
South Salt Lake South Salt Lake City Water System 1 found 0 lead · 3,590 unknown 1
Bluffdale Bluffdale Water System None detected 0 lead · 0 unknown None
Alta Alta Town Water System None detected 0 lead · 0 unknown None

Neighboring counties

Utah

The statewide median is 256 mg/L (very hard) from 4,077 sites.

Utah hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next