Water hardness in Sandy, UT
Water in Sandy is very hard, with a median of 349 mg/L (20.4 grains per gallon) across 152 monitoring sites within 10 miles.
Sandy tap water at a glance
- HardnessVery hard (349 mg/L, 20.4 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesNo lead service lines reported.Details →
- Violations1 health-based violation since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 349 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 20.4 gpg (19.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Sandy
Prefilled with Sandy's measured local hardness of 349 mg/L (20.4 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Sandy tap water
Sandy City Water System is the main public water system for Sandy. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 12 samples taken Jul 2023 – Jul 2025. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Sandy
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Jordan Valley WCD serves over 10,000 people | None detected | — | Aug 2023 – May 2025 |
| Salt Lake City Water System serves over 10,000 people | PFHxS, PFOS, PFPeA +1 more | ND / 7.1 ppt | Oct 2023 – Oct 2024 |
| White City Wid serves over 10,000 people | None detected | — | Feb 2025 – Aug 2025 |
| Waterpro INC serves over 10,000 people | None detected | — | Mar 2023 – Dec 2023 |
| Draper City Water System serves over 10,000 people | None detected | — | Mar 2024 – Dec 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Sandy
Sandy City Water System reported 26,213 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.
Other water systems serving parts of Sandy
| Water system | Service lines | Total |
|---|---|---|
| Jordan Valley WCD | 0 lead · 0 galvanized · 0 unknown | 8,578 |
| Salt Lake City Water System | 120 lead · 102 galvanized · 31,866 unknown | 86,123 |
| White City Wid | 0 lead · 0 galvanized · 1,607 unknown | 4,222 |
| Waterpro INC | 0 lead · 0 galvanized · 0 unknown | 8,662 |
| Draper City Water System | 0 lead · 0 galvanized · 0 unknown | 4,605 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Sandy drinking water violations
EPA records show 1 health-based violation for Sandy City Water System since 2016, all since resolved or closed. The most recent began in Feb 2019. It also had 133 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Fluoride naturally occurring or added; above the federal limit highest measured 104 MG/L; limit 4.0 mg/L | Contaminant above legal limit | 1 | Feb 2019 | Resolved/closed |
Other water systems serving parts of Sandy
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Jordan Valley WCD | None | 2 |
| Salt Lake City Water System | 1 | 4 |
| White City Wid | None | 5 |
| Waterpro INC | None | 78 |
| Draper City Water System | None | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Sandy
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| (D- 3- 1) 8bdd- 1 USGS Utah Water Science Center | Well | 0.7 mi | 472 mg/L | 2 | 2008–2021 |
| (D- 3- 1)17abb- 2 USGS Utah Water Science Center | Well | 0.7 mi | 279 mg/L | 1 | 2001 |
| (D- 3- 1)16ccb- 1 USGS Utah Water Science Center | Well | 1.2 mi | 366 mg/L | 2 | 2012–2020 |
| (D- 3- 1) 3cdc- 1 USGS Utah Water Science Center | Well | 1.3 mi | 153 mg/L | 1 | 2001 |
| (D- 3- 1) 5aca- 2 USGS Utah Water Science Center | Well | 1.3 mi | 134 mg/L | 1 | 2000 |
| (D- 3- 1) 5aca- 1 LUS32 USGS Utah Water Science Center | Well | 1.3 mi | 316 mg/L | 13 | 2000–2020 |
Water hardness in towns near Sandy
| Town | Distance | Median | Class |
|---|---|---|---|
| Cottonwood Heights | 3 mi | 346 mg/L | Very hard |
| Midvale | 4 mi | 364 mg/L | Very hard |
| Draper | 5 mi | 316 mg/L | Very hard |
| Murray | 6 mi | 356 mg/L | Very hard |
| Holladay | 6 mi | 351 mg/L | Very hard |
| South Jordan | 7 mi | 404 mg/L | Very hard |
| Riverton | 7 mi | 414 mg/L | Very hard |
| Taylorsville | 8 mi | 370 mg/L | Very hard |
| Millcreek | 8 mi | 344 mg/L | Very hard |
| Bluffdale | 8 mi | 366 mg/L | Very hard |
Salt Lake County
Sandy is in Salt Lake County, where the median is 369 mg/L (very hard) across 381 sites.
See all of Salt Lake County →Sandy, UT water: common questions
Do I need a water softener in Sandy?
Very likely. Water measured around Sandy is 20.4 gpg (349 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 36,000 grains.Size it for your household →
Who supplies Sandy's drinking water?
The main public water system serving Sandy in EPA records is Sandy City Water System. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Sandy?
It depends on what you want to remove. In Sandy, the system had 1 health-based violation since 2016, for Fluoride; the utility's annual report says what was done about it. On the other hand, no PFAS found in EPA testing and no lead service lines reported. A water softener is not a filter.How to read your water quality report →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.