Water hardness in Emery County, UT

Water in Emery County is very hard, with a median of 619 mg/L (36.1 grains per gallon) across 101 monitoring sites.

142% harder than the Utah median (256 mg/L) 1st hardest of 29 counties
619mg/L
36.1 grains per gallon
Very hard

Emery County water at a glance

  • HardnessVery hard (619 mg/L, 36.1 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 619 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 36.1 gpg (34.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites101
Lab samples1,586
Sample years2000–2023
Middle 50% of sites265–905 mg/L
Groundwater (wells, springs)960 mg/L · 8 sites
Surface water (rivers, lakes)594 mg/L · 93 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Emery County

Prefilled with Emery County's measured local hardness of 619 mg/L (36.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Emery County on the Utah map

Duchesne CountyCache CountySanpete CountySummit CountySan Juan CountyRich CountyWashington CountyIron CountyJuab CountyCarbon CountyGrand CountyTooele CountyWayne CountyUintah CountyGarfield CountyKane CountyBox Elder CountyMillard CountyWeber CountyWasatch CountyMorgan CountyDavis CountySalt Lake CountyBeaver CountyPiute CountyUtah CountySevier CountyDaggett County

Cities and communities in Emery County

PlaceMedian mg/LClassBased on
Huntington 307 Very hard 9 sites within 10 miles
Castle Dale 910 Very hard 13 sites within 10 miles
Ferron 535 Very hard 15 sites within 10 miles
Orangeville 960 Very hard 12 sites within 10 miles
Green River 677 Very hard 9 sites within 10 miles
Cleveland 876 Very hard 4 sites within 10 miles
Elmo 667 Very hard 4 sites within 10 miles
Emery 505 Very hard 19 sites within 10 miles
Clawson 633 Very hard 15 sites within 10 miles

Water quality in Emery County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Orangeville Orangeville Not tested 0 lead · 189 unknown None
Green River Green River City Not tested 0 lead · 300 unknown 3
Cleveland Cleveland Water System Not tested 0 lead · 90 unknown None
Elmo Elmo Town Not tested 0 lead · 35 unknown 1
Emery Emery Not tested 0 lead · 126 unknown None
Clawson Clawson Water System Not tested 0 lead · 21 unknown None

Neighboring counties

Utah

The statewide median is 256 mg/L (very hard) from 4,077 sites.

Utah hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next