Water hardness in Rich County, UT

Water in Rich County is very hard, with a median of 252 mg/L (14.7 grains per gallon) across 41 monitoring sites.

about the same as the Utah median (256 mg/L) 15th hardest of 29 counties
252mg/L
14.7 grains per gallon
Very hard

Rich County water at a glance

  • HardnessVery hard (252 mg/L, 14.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 252 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 14.7 gpg (14.1 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites41
Lab samples320
Sample years2000–2015
Middle 50% of sites202–286 mg/L
Groundwater (wells, springs)203 mg/L · 1 sites
Surface water (rivers, lakes)256 mg/L · 40 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Rich County

Prefilled with Rich County's measured local hardness of 252 mg/L (14.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Rich County on the Utah map

Duchesne CountyCache CountySanpete CountySummit CountySan Juan CountyWashington CountyIron CountyJuab CountyCarbon CountyEmery CountyGrand CountyTooele CountyWayne CountyUintah CountyGarfield CountyKane CountyBox Elder CountyMillard CountyWeber CountyWasatch CountyMorgan CountyDavis CountySalt Lake CountyBeaver CountyPiute CountyUtah CountySevier CountyDaggett County

Cities and communities in Rich County

PlaceMedian mg/LClassBased on
Garden City 269 Very hard 15 sites within 10 miles
Randolph 250 Very hard 20 sites within 10 miles
Laketown 274 Very hard 12 sites within 10 miles
Garden (CDP) 209 Very hard 17 sites within 10 miles
Woodruff 218 Very hard 13 sites within 10 miles

Water quality in Rich County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Garden City Garden City Not tested 0 lead · 0 unknown None
Randolph Randolph Town Water System Not tested 0 lead · 143 unknown None
Laketown Laketown Not tested 0 lead · 69 unknown 3
Garden Garden City Not tested 0 lead · 0 unknown None
Woodruff Woodruff Town Water System Not tested 0 lead · 60 unknown None

Neighboring counties

Utah

The statewide median is 256 mg/L (very hard) from 4,077 sites.

Utah hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next