Water hardness in Randolph County, NC
Water in Randolph County is soft, with a median of 48 mg/L (2.8 grains per gallon) across 29 monitoring sites.
Randolph County water at a glance
- HardnessSoft (48 mg/L, 2.8 gpg, local measurements). A water softener isn't needed.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 48 mg/L means at home
- Water softener: A water softener is generally not needed. Soft water rarely causes scale.
- Dishwasher: set the water hardness to about 2.8 gpg (2.7 °dH), which is the lowest hardness setting (or softener off).
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Randolph County
Prefilled with Randolph County's measured local hardness of 48 mg/L (2.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Randolph County on the North Carolina map
Cities and communities in Randolph County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Asheboro | 48 | Soft | 25 sites within 10 miles |
| Trinity | 58 | Soft | 15 sites within 10 miles |
| Randleman | 48 | Soft | 13 sites within 10 miles |
| Liberty | 35 | Soft | 4 sites within 10 miles |
| Ramseur | 58 | Soft | 18 sites within 10 miles |
| Franklinville | 48 | Soft | 21 sites within 10 miles |
| Staley | 35 | Soft | 4 sites within 10 miles |
| Seagrove | 27 | Soft | 15 sites within 10 miles |
Water quality in Randolph County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Asheboro | City of Asheboro | 8 found (PFOA 10.2 / PFOS 16.3 ppt) | 0 lead · 9,816 unknown | 2 |
| Trinity | Twin Oaks Water System | Not tested | 0 lead · 14 unknown | None |
| Randleman | City of Randleman | 8 found (PFOA 11.4 / PFOS 14.1 ppt) | 0 lead · 42 unknown | None |
| Liberty | Town of Liberty | Not tested | 0 lead · 986 unknown | 1 |
| Ramseur | Town of Ramseur | Not tested | 0 lead · 1,366 unknown | 13 (1 open) |
| Franklinville | Town of Franklinville | Not tested | 0 lead · 0 unknown | 1 |
| Seagrove | Seagrove-Ulah Metro Water Dist | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Davidson County46 mg/L
- Guilford County40 mg/L
- Montgomery County23 mg/L
- Chatham County38 mg/L
- Alamance County42 mg/L
- Moore County14 mg/L
North Carolina
The statewide median is 33 mg/L (soft) from 1,749 sites.
North Carolina hardness map →Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.