Water hardness in La Crosse County, WI
Water in La Crosse County is very hard, with a median of 228 mg/L (13.3 grains per gallon) across 4 monitoring sites.
La Crosse County water at a glance
- HardnessVery hard (228 mg/L, 13.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 228 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 13.3 gpg (12.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for La Crosse County
Prefilled with La Crosse County's measured local hardness of 228 mg/L (13.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
La Crosse County on the Wisconsin map
Cities and communities in La Crosse County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| La Crosse | 185 | Very hard | 3 sites within 10 miles |
| Onalaska | 185 | Very hard | 3 sites within 10 miles |
| Holmen | 134 | Hard | 4 sites within 10 miles |
| West Salem | 228 | Very hard | county median |
| French Island (CDP) | 185 | Very hard | 3 sites within 10 miles |
| Brice Prairie (CDP) | 185 | Very hard | 5 sites within 10 miles |
| Bangor | 228 | Very hard | county median |
| Rockland | 228 | Very hard | county median |
| Mindoro (CDP) | 228 | Very hard | county median |
| St. Joseph (CDP) | 228 | Very hard | county median |
Water quality in La Crosse County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| La Crosse | La Crosse Waterworks | 7 found (PFOA 5.1 / PFOS 5.5 ppt) | 0 lead · 0 unknown | None |
| Onalaska | Onalaska Waterworks | 1 found | 0 lead · 0 unknown | None |
| Holmen | Holmen Waterworks | 1 found | 0 lead · 414 unknown | 2 |
| West Salem | West Salem Waterworks | None detected | 0 lead · 0 unknown | None |
| Bangor | Bangor Waterworks | Not tested | 0 lead · 441 unknown | 1 |
| Rockland | Rockland Waterworks | Not tested | 0 lead · 185 unknown | 1 |
| Mindoro | Town of Farmington Sanitary District | Not tested | 0 lead · 125 unknown | 6 |
Neighboring counties
- Monroe County175 mg/L
- Vernon County143 mg/L
- Trempealeau County106 mg/L
- Jackson County35 mg/L
- Buffalo County186 mg/L
- Crawford County233 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.