Water hardness in Iron County, WI
Water in Iron County is soft, with a median of 56 mg/L (3.2 grains per gallon) across 21 monitoring sites.
Iron County water at a glance
- HardnessSoft (56 mg/L, 3.2 gpg, local measurements). A water softener isn't needed.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 56 mg/L means at home
- Water softener: A water softener is generally not needed. Soft water rarely causes scale.
- Dishwasher: set the water hardness to about 3.2 gpg (3.1 °dH), which is the lowest hardness setting (or softener off).
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Iron County
Prefilled with Iron County's measured local hardness of 56 mg/L (3.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Iron County on the Wisconsin map
Cities and communities in Iron County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Hurley | 56 | Soft | county median |
| Montreal | 56 | Soft | county median |
| Mercer (CDP) | 45 | Soft | 8 sites within 10 miles |
| Iron Belt (CDP) | 55 | Soft | 6 sites within 10 miles |
| Pence (CDP) | 56 | Soft | county median |
| Saxon (CDP) | 56 | Soft | 17 sites within 10 miles |
Water quality in Iron County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Hurley | Hurley Waterworks | Not tested | 0 lead · 112 unknown | 5 |
| Montreal | Montreal Waterworks | Not tested | 0 lead · 278 unknown | 3 |
| Mercer | Mercer Sanitary District | Not tested | 0 lead · 0 unknown | None |
| Iron Belt | Iron Belt Waterworks | Not tested | 0 lead · 51 unknown | 4 |
| Pence | Pence Waterworks | Not tested | 0 lead · 16 unknown | 2 |
Neighboring counties
- Ashland County62 mg/L
- Vilas County34 mg/L
- Price County38 mg/L
- Bayfield County59 mg/L
- Sawyer County41 mg/L
- Oneida County47 mg/L
Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.