Water hardness in Vernon County, WI
Water in Vernon County is hard, with a median of 143 mg/L (8.4 grains per gallon) across 5 monitoring sites.
Vernon County water at a glance
- HardnessHard (143 mg/L, 8.4 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 143 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 8.4 gpg (8 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Vernon County
Prefilled with Vernon County's measured local hardness of 143 mg/L (8.4 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Vernon County on the Wisconsin map
Cities and communities in Vernon County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Viroqua | 143 | Hard | county median |
| Westby | 143 | Hard | county median |
| Hillsboro | 143 | Hard | county median |
| Stoddard | 143 | Hard | county median |
| Viola | 143 | Hard | county median |
| Coon Valley | 143 | Hard | county median |
| La Farge | 143 | Hard | county median |
| Ontario | 143 | Hard | county median |
| Readstown | 143 | Hard | county median |
| Chaseburg | 143 | Hard | county median |
| Genoa | 143 | Hard | 3 sites within 10 miles |
Water quality in Vernon County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Viroqua | Viroqua Waterworks | None detected | 0 lead · 146 unknown | None |
| Westby | Westby Waterworks | Not tested | 0 lead · 0 unknown | 1 |
| Hillsboro | Hillsboro Waterworks | Not tested | 0 lead · 0 unknown | 8 |
| Stoddard | Stoddard Waterworks | Not tested | 0 lead · 149 unknown | 3 |
| Viola | Viola Waterworks | Not tested | 7 lead · 0 unknown | None |
| Coon Valley | Coon Valley Waterworks | Not tested | 0 lead · 143 unknown | 1 |
| La Farge | La Farge Waterworks | Not tested | 0 lead · 0 unknown | None |
| Ontario | Ontario Waterworks | Not tested | 0 lead · 238 unknown | 1 |
| Readstown | Readstown Waterworks | Not tested | 0 lead · 2 unknown | 2 |
| Chaseburg | Village of Chaseburg Waterworks | Not tested | 0 lead · 0 unknown | None |
| Genoa | Genoa City Waterworks | Not tested | 164 lead · 0 unknown | 1 |
Neighboring counties
- Richland County272 mg/L
- Crawford County233 mg/L
- La Crosse County228 mg/L
- Monroe County175 mg/L
- Juneau County74 mg/L
- Sauk County119 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.