Water hardness in Florence County, WI
Water in Florence County is moderately hard, with a median of 110 mg/L (6.4 grains per gallon) across 4 monitoring sites.
Florence County water at a glance
- HardnessModerately hard (110 mg/L, 6.4 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 110 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 6.4 gpg (6.2 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Florence County
Prefilled with Florence County's measured local hardness of 110 mg/L (6.4 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Florence County on the Wisconsin map
Cities and communities in Florence County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Florence (CDP) | 110 | Moderately hard | county median |
| Long Lake (CDP) | 110 | Moderately hard | county median |
Water quality in Florence County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Florence | Florence Utility Commission | Not tested | 0 lead · 1 unknown | None |
Neighboring counties
- Forest County95 mg/L
- Marinette County120 mg/L
- Langlade County110 mg/L
- Vilas County34 mg/L
- Oneida County47 mg/L
- Oconto County170 mg/L
Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.