Water hardness in Wichita County, TX
Water in Wichita County is very hard, with a median of 795 mg/L (46.4 grains per gallon) across 4 monitoring sites.
Wichita County water at a glance
- HardnessVery hard (795 mg/L, 46.4 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 795 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 46.4 gpg (44.5 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Wichita County
Prefilled with Wichita County's measured local hardness of 795 mg/L (46.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Wichita County on the Texas map
Cities and communities in Wichita County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Wichita Falls | 514 | Very hard | 3 sites within 10 miles |
| Burkburnett | 795 | Very hard | county median |
| Iowa Park | 795 | Very hard | county median |
| Electra | 795 | Very hard | county median |
| Pleasant Valley | 514 | Very hard | 3 sites within 10 miles |
| Cashion Community | 1,075 | Very hard | 3 sites within 10 miles |
Water quality in Wichita County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Wichita Falls | City of Wichita Falls | 3 found | 0 lead · 0 unknown | None |
| Burkburnett | City of Burkburnett | 3 found | 0 lead · 2,805 unknown | 7 |
| Iowa Park | City of Iowa Park | 2 found | 0 lead · 77 unknown | None |
| Electra | City of Electra | Not tested | 0 lead · 913 unknown | None |
| Pleasant Valley | Town of Pleasant Valley | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Clay County118 mg/L
- Baylor County885 mg/L
- Young County879 mg/L
- Throckmorton County636 mg/L
- Foard County1115 mg/L
- Knox County1180 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.