Water hardness in Howard County, TX
Water in Howard County is very hard, with a median of 512 mg/L (29.9 grains per gallon) across 4 monitoring sites.
Howard County water at a glance
- HardnessVery hard (512 mg/L, 29.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 512 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 29.9 gpg (28.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Howard County
Prefilled with Howard County's measured local hardness of 512 mg/L (29.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Howard County on the Texas map
Cities and communities in Howard County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Big Spring | 512 | Very hard | county median |
| Coahoma | 512 | Very hard | county median |
| Sand Springs (CDP) | 512 | Very hard | county median |
| Forsan | 512 | Very hard | county median |
Water quality in Howard County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Big Spring | City of Big Spring | 5 found (PFOA ND / PFOS 4.4 ppt) | 2 lead · 462 unknown | 27 |
| Coahoma | City of Coahoma | 3 found | 0 lead · 0 unknown | 28 |
| Forsan | City of Forsan | Not tested | 0 lead · 2 unknown | 1 |
Neighboring counties
- Mitchell County464 mg/L
- Borden County144 mg/L
- Martin County509 mg/L
- Sterling County260 mg/L
- Dawson County735 mg/L
- Midland County290 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.