Water hardness in Uvalde County, TX
Water in Uvalde County is very hard, with a median of 231 mg/L (13.5 grains per gallon) across 30 monitoring sites.
Uvalde County water at a glance
- HardnessVery hard (231 mg/L, 13.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 231 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 13.5 gpg (12.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Uvalde County
Prefilled with Uvalde County's measured local hardness of 231 mg/L (13.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Uvalde County on the Texas map
Cities and communities in Uvalde County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Uvalde | 243 | Very hard | 10 sites within 10 miles |
| Uvalde Estates (CDP) | 243 | Very hard | 8 sites within 10 miles |
| Sabinal | 240 | Very hard | 4 sites within 10 miles |
| Knippa (CDP) | 240 | Very hard | 10 sites within 10 miles |
| Utopia (CDP) | 230 | Very hard | 3 sites within 10 miles |
Water quality in Uvalde County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Uvalde | City of Uvalde | None detected | 0 lead · 0 unknown | None |
| Sabinal | City of Sabinal | Not tested | Not reported | 2 (1 open) |
Neighboring counties
- Real County197 mg/L
- Zavala County196 mg/L
- Kinney County207 mg/L
- Medina County239 mg/L
- Bandera County238 mg/L
- Frio County229 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.