Water hardness in Ransom County, ND

Water in Ransom County is very hard, with a median of 397 mg/L (23.2 grains per gallon) across 16 monitoring sites.

about the same as the North Dakota median (368 mg/L) 23rd hardest of 53 counties
397mg/L
23.2 grains per gallon
Very hard

Ransom County water at a glance

  • HardnessVery hard (397 mg/L, 23.2 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 397 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 23.2 gpg (22.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites16
Lab samples214
Sample years2000–2024
Middle 50% of sites265–425 mg/L
Groundwater (wells, springs)288 mg/L · 10 sites
Surface water (rivers, lakes)418 mg/L · 6 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Ransom County

Prefilled with Ransom County's measured local hardness of 397 mg/L (23.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Ransom County on the North Dakota map

Burke CountyFoster CountyGriggs CountyHettinger CountyLogan CountyRenville CountyOliver CountyLaMoure CountyPierce CountyWells CountySheridan CountyKidder CountyCavalier CountyStark CountyBarnes CountyEddy CountyRichland CountyStutsman CountyRolette CountySlope CountyBottineau CountyWalsh CountyAdams CountyWilliams CountyMcIntosh CountyMorton CountyDunn CountyMcKenzie CountySteele CountyTowner CountyMcLean CountyMercer CountyDivide CountyWard CountySargent CountyBillings CountyMcHenry CountyBowman CountyGrant CountyGrand Forks CountyRamsey CountyPembina CountyEmmons CountyTraill CountyBenson CountyNelson CountyMountrail CountySioux CountyDickey CountyCass CountyBurleigh CountyGolden Valley County

Cities and communities in Ransom County

PlaceMedian mg/LClassBased on
Lisbon 413 Very hard 4 sites within 10 miles
Enderlin 397 Very hard county median
Fort Ransom 397 Very hard county median
Sheldon 245 Very hard 3 sites within 10 miles
Englevale (CDP) 419 Very hard 3 sites within 10 miles
McLeod (CDP) 265 Very hard 10 sites within 10 miles
Elliott 417 Very hard 7 sites within 10 miles

Water quality in Ransom County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Lisbon City of Lisbon Not tested 1 lead · 856 unknown None
Enderlin City of Enderlin Not tested 48 lead · 206 unknown None
Sheldon City of Sheldon Not tested 3 lead · 50 unknown None

Neighboring counties

North Dakota

The statewide median is 368 mg/L (very hard) from 747 sites.

North Dakota hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next