Water hardness in Ward County, ND
Water in Ward County is very hard, with a median of 419 mg/L (24.5 grains per gallon) across 7 monitoring sites.
Ward County water at a glance
- HardnessVery hard (419 mg/L, 24.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 419 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 24.5 gpg (23.5 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Ward County
Prefilled with Ward County's measured local hardness of 419 mg/L (24.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Ward County on the North Dakota map
Cities and communities in Ward County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Minot | 419 | Very hard | county median |
| Minot AFB (CDP) | 419 | Very hard | county median |
| Surrey | 419 | Very hard | county median |
| Burlington | 326 | Very hard | 3 sites within 10 miles |
| Kenmare | 419 | Very hard | county median |
| Berthold | 419 | Very hard | county median |
| Sawyer | 419 | Very hard | county median |
| Logan (CDP) | 419 | Very hard | county median |
| Ruthville (CDP) | 326 | Very hard | 3 sites within 10 miles |
| Des Lacs | 419 | Very hard | 5 sites within 10 miles |
| Makoti | 419 | Very hard | county median |
| Carpio | 495 | Very hard | 3 sites within 10 miles |
| Ryder | 419 | Very hard | county median |
| Douglas | 419 | Very hard | county median |
| Foxholm (CDP) | 408 | Very hard | 4 sites within 10 miles |
| Donnybrook | 419 | Very hard | county median |
Water quality in Ward County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Minot | City of Minot | None detected | 280 lead · 9,101 unknown | None |
| Surrey | City of Surrey | Not tested | 0 lead · 295 unknown | None |
| Burlington | City of Burlington | Not tested | 0 lead · 335 unknown | None |
| Kenmare | City of Kenmare | Not tested | 32 lead · 286 unknown | None |
| Berthold | City of Berthold | Not tested | 2 lead · 164 unknown | None |
| Sawyer | City of Sawyer | Not tested | 0 lead · 21 unknown | None |
| Makoti | City of Makoti | Not tested | 0 lead · 81 unknown | None |
| Ryder | City of Ryder | Not tested | 0 lead · 29 unknown | None |
Neighboring counties
- Renville County288 mg/L
- Mountrail County234 mg/L
- McLean County254 mg/L
- McHenry County394 mg/L
- Bottineau County412 mg/L
- Burke County180 mg/L
North Dakota
The statewide median is 368 mg/L (very hard) from 747 sites.
North Dakota hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.