Water hardness in Burke County, ND
Water in Burke County is hard, with a median of 180 mg/L (10.5 grains per gallon) across 41 monitoring sites.
Burke County water at a glance
- HardnessHard (180 mg/L, 10.5 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 180 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 10.5 gpg (10.1 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Burke County
Prefilled with Burke County's measured local hardness of 180 mg/L (10.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Burke County on the North Dakota map
Cities and communities in Burke County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Powers Lake | 180 | Hard | 23 sites within 10 miles |
| Bowbells | 180 | Hard | county median |
| Lignite | 180 | Hard | county median |
| Columbus | 180 | Hard | county median |
| Portal | 180 | Hard | county median |
| Flaxton | 180 | Hard | county median |
| Larson (CDP) | 180 | Hard | county median |
Water quality in Burke County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Powers Lake | City of Powers Lake | Not tested | 0 lead · 242 unknown | None |
| Bowbells | City of Bowbells | Not tested | 0 lead · 180 unknown | None |
| Lignite | City of Lignite | Not tested | 0 lead · 0 unknown | None |
| Columbus | City of Columbus | Not tested | 0 lead · 159 unknown | None |
| Portal | City of Portal | Not tested | 0 lead · 103 unknown | None |
| Flaxton | City of Flaxton | Not tested | 0 lead · 0 unknown | 3 |
Neighboring counties
- Renville County288 mg/L
- Mountrail County234 mg/L
- Divide County254 mg/L
- Williams County358 mg/L
- Ward County419 mg/L
- Bottineau County412 mg/L
North Dakota
The statewide median is 368 mg/L (very hard) from 747 sites.
North Dakota hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.