Water hardness in Beltrami County, MN
Water in Beltrami County is hard, with a median of 150 mg/L (8.8 grains per gallon) across 34 monitoring sites.
Beltrami County water at a glance
- HardnessHard (150 mg/L, 8.8 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 150 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 8.8 gpg (8.4 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Beltrami County
Prefilled with Beltrami County's measured local hardness of 150 mg/L (8.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Beltrami County on the Minnesota map
Cities and communities in Beltrami County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Bemidji | 170 | Hard | 10 sites within 10 miles |
| Red Lake (CDP) | 150 | Hard | county median |
| Redby (CDP) | 150 | Hard | county median |
| Little Rock (CDP) | 150 | Hard | county median |
| Blackduck | 140 | Hard | 9 sites within 10 miles |
| Ponemah (CDP) | 150 | Hard | county median |
| Wilton | 190 | Very hard | 9 sites within 10 miles |
| Kelliher | 150 | Hard | county median |
| Tenstrike | 150 | Hard | 18 sites within 10 miles |
| Turtle River | 156 | Hard | 16 sites within 10 miles |
| Solway | 213 | Very hard | 6 sites within 10 miles |
| Funkley | 141 | Hard | 7 sites within 10 miles |
Water quality in Beltrami County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Bemidji | Bemidji | None detected | 0 lead · 332 unknown | None |
| Blackduck | Blackduck | Not tested | 0 lead · 94 unknown | None |
| Kelliher | Kelliher | Not tested | 0 lead · 31 unknown | None |
Neighboring counties
- Clearwater County172 mg/L
- Pennington County193 mg/L
- Red Lake County301 mg/L
- Mahnomen County218 mg/L
- Hubbard County154 mg/L
- Lake of the Woods County57 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.