Water hardness in Benton County, MN
Water in Benton County is hard, with a median of 145 mg/L (8.5 grains per gallon) across 10 monitoring sites.
Benton County water at a glance
- HardnessHard (145 mg/L, 8.5 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 145 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 8.5 gpg (8.1 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Benton County
Prefilled with Benton County's measured local hardness of 145 mg/L (8.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Benton County on the Minnesota map
Cities and communities in Benton County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| St. Cloud | 174 | Hard | 19 sites within 10 miles |
| Sartell | 165 | Hard | 14 sites within 10 miles |
| Sauk Rapids | 165 | Hard | 16 sites within 10 miles |
| Foley | 145 | Hard | 4 sites within 10 miles |
| Rice | 215 | Very hard | 12 sites within 10 miles |
| Gilman | 145 | Hard | county median |
| Ronneby (CDP) | 145 | Hard | county median |
Water quality in Benton County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| St. Cloud | Saint Cloud | 1 found | 0 lead · 1,485 unknown | None |
| Sartell | Sartell | 1 found | 0 lead · 0 unknown | None |
| Sauk Rapids | Sauk Rapids | 8 found (PFOA 8.1 / PFOS 12 ppt) | 0 lead · 0 unknown | None |
| Foley | Foley | Not tested | 1 lead · 24 unknown | None |
| Rice | Rice | Not tested | 0 lead · 207 unknown | None |
Neighboring counties
- Sherburne County210 mg/L
- Mille Lacs County101 mg/L
- Morrison County170 mg/L
- Stearns County220 mg/L
- Isanti County122 mg/L
- Wright County190 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.