Water hardness in Clay County, MN

Water in Clay County is very hard, with a median of 360 mg/L (21 grains per gallon) across 21 monitoring sites.

89% harder than the Minnesota median (190 mg/L) 20th hardest of 87 counties
360mg/L
21 grains per gallon
Very hard

Clay County water at a glance

  • HardnessVery hard (360 mg/L, 21 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 360 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 21 gpg (20.2 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites21
Lab samples178
Sample years2002–2025
Middle 50% of sites290–440 mg/L
Groundwater (wells, springs)344 mg/L · 1 sites
Surface water (rivers, lakes)372 mg/L · 20 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Clay County

Prefilled with Clay County's measured local hardness of 360 mg/L (21.1 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Clay County on the Minnesota map

Brown CountyKandiyohi CountyMurray CountyNobles CountyDodge CountyTodd CountyIsanti CountyCottonwood CountyLyon CountyWaseca CountyPipestone CountyRock CountyCook CountySteele CountyGrant CountyWatonwan CountyMahnomen CountyPolk CountyRoseau CountyCass CountyOtter Tail CountyFreeborn CountyMcLeod CountyLe Sueur CountyMartin CountyRenville CountyBecker CountyDouglas CountyHubbard CountyOlmsted CountyChippewa CountyRedwood CountySwift CountyMorrison CountyBenton CountyStevens CountyCrow Wing CountyPennington CountySt. Louis CountyKanabec CountyNorman CountyFillmore CountyJackson CountyChisago CountyLake CountyAnoka CountyCarver CountyLac qui Parle CountyTraverse CountyWinona CountyWadena CountyDakota CountyHouston CountyWilkin CountyClearwater CountyKoochiching CountyAitkin CountyBlue Earth CountyRice CountySherburne CountyMarshall CountyWabasha CountyYellow Medicine CountySibley CountyLake of the Woods CountyMeeker CountyHennepin CountyScott CountyPope CountyBeltrami CountyItasca CountyRamsey CountyMower CountyNicollet CountyRed Lake CountyFaribault CountyWright CountyLincoln CountyBig Stone CountyGoodhue CountyStearns CountyPine CountyKittson CountyMille Lacs CountyWashington CountyCarlton County

Cities and communities in Clay County

PlaceMedian mg/LClassBased on
Moorhead 290 Very hard 5 sites within 10 miles
Dilworth 342 Very hard 5 sites within 10 miles
Barnesville 454 Very hard 4 sites within 10 miles
Hawley 340 Very hard 7 sites within 10 miles
Glyndon 343 Very hard 4 sites within 10 miles
Sabin 462 Very hard 7 sites within 10 miles
Ulen 350 Very hard 3 sites within 10 miles
Hitterdal 358 Very hard 8 sites within 10 miles
Felton 360 Very hard county median
Comstock 493 Very hard 6 sites within 10 miles
Georgetown 414 Very hard 4 sites within 10 miles
Baker (CDP) 524 Very hard 5 sites within 10 miles

Water quality in Clay County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Moorhead Moorhead 1 found 239 lead · 2,084 unknown None
Dilworth Dilworth 1 found 13 lead · 852 unknown None
Barnesville Barnesville Not tested 17 lead · 793 unknown None
Hawley Hawley Not tested 1 lead · 311 unknown None
Glyndon Glyndon Not tested 0 lead · 171 unknown None
Sabin Sabin Not tested 2 lead · 179 unknown 1
Ulen Ulen Not tested 0 lead · 238 unknown None
Hitterdal Hitterdal Not tested 0 lead · 130 unknown None
Felton Felton Not tested 0 lead · 2 unknown None
Comstock Comstock Not tested 0 lead · 0 unknown 1
Georgetown Georgetown Not tested 0 lead · 5 unknown None

Neighboring counties

Minnesota

The statewide median is 190 mg/L (very hard) from 2,553 sites.

Minnesota hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next