Water hardness in Graham County, KS

Water in Graham County is very hard, with a median of 255 mg/L (14.9 grains per gallon) across 6 monitoring sites.

about the same as the Kansas median (245 mg/L) 55th hardest of 105 counties
255mg/L
14.9 grains per gallon
Very hard

Graham County water at a glance

  • HardnessVery hard (255 mg/L, 14.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 255 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 14.9 gpg (14.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites6
Lab samples23
Sample years2006–2016
Middle 50% of sites225–352 mg/L
Surface water (rivers, lakes)255 mg/L · 6 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Graham County

Prefilled with Graham County's measured local hardness of 255 mg/L (14.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Graham County on the Kansas map

Lyon CountyAllen CountyEllsworth CountyHamilton CountyTrego CountyChase CountyReno CountyFranklin CountyFord CountyWallace CountyBourbon CountyCoffey CountyNeosho CountyWichita CountyBrown CountyGreeley CountyMcPherson CountyMorris CountyThomas CountyJackson CountyLane CountyNemaha CountyScott CountyBarton CountyPawnee CountyRice CountyEllis CountyEdwards CountyGrant CountyClark CountyHodgeman CountyPratt CountyGray CountySheridan CountySaline CountyHaskell CountyCrawford CountyComanche CountyClay CountyRooks CountyDickinson CountyPhillips CountyAnderson CountyLabette CountyHarper CountyJewell CountyOsage CountyRussell CountyElk CountyLinn CountyKearny CountyMitchell CountyLogan CountyChautauqua CountyGeary CountyOsborne CountyMeade CountySherman CountyFinney CountyMorton CountyGreenwood CountyHarvey CountyCowley CountyWilson CountyStanton CountyBarber CountyDecatur CountyButler CountyPottawatomie CountyCherokee CountyJohnson CountyKiowa CountyRush CountyMarshall CountyMarion CountySedgwick CountySmith CountyLeavenworth CountyCheyenne CountyDoniphan CountyJefferson CountyShawnee CountyOttawa CountyRepublic CountyMiami CountyRawlins CountyWyandotte CountyMontgomery CountyWashington CountyLincoln CountySeward CountyNorton CountyDouglas CountyStevens CountyRiley CountyWabaunsee CountyNess CountyStafford CountyWoodson CountyGove CountyKingman CountyCloud CountySumner CountyAtchison County

Cities and communities in Graham County

PlaceMedian mg/LClassBased on
Hill City 380 Very hard 3 sites within 10 miles
Bogue 520 Very hard 3 sites within 10 miles
Morland 195 Very hard 3 sites within 10 miles
Nicodemus (CDP) 255 Very hard county median

Water quality in Graham County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Hill City City of Hill City Not tested 0 lead · 0 unknown None
Bogue City of Bogue Not tested Not reported None
Morland City of Morland Not tested Not reported 1 (1 open)
Nicodemus Nicodemus Township Not tested 12 lead · 0 unknown 1

Neighboring counties

Kansas

The statewide median is 245 mg/L (very hard) from 1,655 sites.

Kansas hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next