Water hardness in Phillips County, KS

Water in Phillips County is very hard, with a median of 490 mg/L (28.6 grains per gallon) across 7 monitoring sites.

100% harder than the Kansas median (245 mg/L) 16th hardest of 105 counties
490mg/L
28.6 grains per gallon
Very hard

Phillips County water at a glance

  • HardnessVery hard (490 mg/L, 28.6 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 490 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 28.6 gpg (27.5 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites7
Lab samples211
Sample years2000–2018
Middle 50% of sites388–522 mg/L
Groundwater (wells, springs)674 mg/L · 1 sites
Surface water (rivers, lakes)445 mg/L · 6 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Phillips County

Prefilled with Phillips County's measured local hardness of 490 mg/L (28.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Phillips County on the Kansas map

Lyon CountyAllen CountyEllsworth CountyHamilton CountyTrego CountyChase CountyReno CountyFranklin CountyFord CountyWallace CountyBourbon CountyCoffey CountyNeosho CountyWichita CountyBrown CountyGreeley CountyMcPherson CountyMorris CountyThomas CountyJackson CountyLane CountyNemaha CountyScott CountyBarton CountyPawnee CountyRice CountyEllis CountyEdwards CountyGrant CountyClark CountyHodgeman CountyPratt CountyGray CountySheridan CountySaline CountyHaskell CountyCrawford CountyComanche CountyClay CountyRooks CountyDickinson CountyAnderson CountyLabette CountyHarper CountyJewell CountyOsage CountyRussell CountyElk CountyGraham CountyLinn CountyKearny CountyMitchell CountyLogan CountyChautauqua CountyGeary CountyOsborne CountyMeade CountySherman CountyFinney CountyMorton CountyGreenwood CountyHarvey CountyCowley CountyWilson CountyStanton CountyBarber CountyDecatur CountyButler CountyPottawatomie CountyCherokee CountyJohnson CountyKiowa CountyRush CountyMarshall CountyMarion CountySedgwick CountySmith CountyLeavenworth CountyCheyenne CountyDoniphan CountyJefferson CountyShawnee CountyOttawa CountyRepublic CountyMiami CountyRawlins CountyWyandotte CountyMontgomery CountyWashington CountyLincoln CountySeward CountyNorton CountyDouglas CountyStevens CountyRiley CountyWabaunsee CountyNess CountyStafford CountyWoodson CountyGove CountyKingman CountyCloud CountySumner CountyAtchison County

Cities and communities in Phillips County

PlaceMedian mg/LClassBased on
Phillipsburg 500 Very hard 3 sites within 10 miles
Logan 490 Very hard county median
Agra 465 Very hard 3 sites within 10 miles
Long Island 490 Very hard county median
Kirwin 478 Very hard 4 sites within 10 miles
Prairie View 490 Very hard county median
Glade 410 Very hard 5 sites within 10 miles
Speed 500 Very hard 5 sites within 10 miles
Stuttgart (CDP) 490 Very hard county median
Woodruff (CDP) 490 Very hard county median

Water quality in Phillips County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Phillipsburg City of Phillipsburg Not tested 10 lead · 1,155 unknown None
Logan City of Logan Not tested Not reported None
Agra City of Agra Not tested 1 lead · 0 unknown 1
Long Island City of Long Island Not tested Not reported None
Kirwin City of Kirwin Not tested 0 lead · 0 unknown None
Prairie View City of Prairie View Not tested Not reported None
Glade City of Glade Not tested 0 lead · 0 unknown 1
Speed City of Speed Not tested Not reported None

Neighboring counties

Kansas

The statewide median is 245 mg/L (very hard) from 1,655 sites.

Kansas hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next