Water hardness in Ellis County, KS

Water in Ellis County is very hard, with a median of 540 mg/L (31.5 grains per gallon) across 11 monitoring sites.

120% harder than the Kansas median (245 mg/L) 12th hardest of 105 counties
540mg/L
31.5 grains per gallon
Very hard

Ellis County water at a glance

  • HardnessVery hard (540 mg/L, 31.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 540 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 31.5 gpg (30.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites11
Lab samples358
Sample years2000–2018
Middle 50% of sites365–670 mg/L
Groundwater (wells, springs)712 mg/L · 1 sites
Surface water (rivers, lakes)495 mg/L · 10 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Ellis County

Prefilled with Ellis County's measured local hardness of 540 mg/L (31.6 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Ellis County on the Kansas map

Lyon CountyAllen CountyEllsworth CountyHamilton CountyTrego CountyChase CountyReno CountyFranklin CountyFord CountyWallace CountyBourbon CountyCoffey CountyNeosho CountyWichita CountyBrown CountyGreeley CountyMcPherson CountyMorris CountyThomas CountyJackson CountyLane CountyNemaha CountyScott CountyBarton CountyPawnee CountyRice CountyEdwards CountyGrant CountyClark CountyHodgeman CountyPratt CountyGray CountySheridan CountySaline CountyHaskell CountyCrawford CountyComanche CountyClay CountyRooks CountyDickinson CountyPhillips CountyAnderson CountyLabette CountyHarper CountyJewell CountyOsage CountyRussell CountyElk CountyGraham CountyLinn CountyKearny CountyMitchell CountyLogan CountyChautauqua CountyGeary CountyOsborne CountyMeade CountySherman CountyFinney CountyMorton CountyGreenwood CountyHarvey CountyCowley CountyWilson CountyStanton CountyBarber CountyDecatur CountyButler CountyPottawatomie CountyCherokee CountyJohnson CountyKiowa CountyRush CountyMarshall CountyMarion CountySedgwick CountySmith CountyLeavenworth CountyCheyenne CountyDoniphan CountyJefferson CountyShawnee CountyOttawa CountyRepublic CountyMiami CountyRawlins CountyWyandotte CountyMontgomery CountyWashington CountyLincoln CountySeward CountyNorton CountyDouglas CountyStevens CountyRiley CountyWabaunsee CountyNess CountyStafford CountyWoodson CountyGove CountyKingman CountyCloud CountySumner CountyAtchison County

Cities and communities in Ellis County

PlaceMedian mg/LClassBased on
Hays 365 Very hard 4 sites within 10 miles
Ellis 315 Very hard 3 sites within 10 miles
Victoria 540 Very hard county median
Munjor (CDP) 450 Very hard 7 sites within 10 miles
Schoenchen 670 Very hard 3 sites within 10 miles
Catharine (CDP) 365 Very hard 4 sites within 10 miles

Water quality in Ellis County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Hays City of Hays 4 found 0 lead · 178 unknown None
Ellis City of Ellis Not tested 0 lead · 835 unknown 8
Victoria City of Victoria Not tested Not reported None
Munjor Ellis Co RWD 3 Not tested Not reported None
Schoenchen City of Schoenchen Not tested Not reported 1

Neighboring counties

Kansas

The statewide median is 245 mg/L (very hard) from 1,655 sites.

Kansas hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next