Water hardness in Chase County, KS

Water in Chase County is very hard, with a median of 275 mg/L (16.1 grains per gallon) across 18 monitoring sites.

12% harder than the Kansas median (245 mg/L) 49th hardest of 105 counties
275mg/L
16.1 grains per gallon
Very hard

Chase County water at a glance

  • HardnessVery hard (275 mg/L, 16.1 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 275 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 16.1 gpg (15.4 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites18
Lab samples591
Sample years2000–2018
Middle 50% of sites260–298 mg/L
Groundwater (wells, springs)515 mg/L · 1 sites
Surface water (rivers, lakes)275 mg/L · 17 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Chase County

Prefilled with Chase County's measured local hardness of 275 mg/L (16.1 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Chase County on the Kansas map

Lyon CountyAllen CountyEllsworth CountyHamilton CountyTrego CountyReno CountyFranklin CountyFord CountyWallace CountyBourbon CountyCoffey CountyNeosho CountyWichita CountyBrown CountyGreeley CountyMcPherson CountyMorris CountyThomas CountyJackson CountyLane CountyNemaha CountyScott CountyBarton CountyPawnee CountyRice CountyEllis CountyEdwards CountyGrant CountyClark CountyHodgeman CountyPratt CountyGray CountySheridan CountySaline CountyHaskell CountyCrawford CountyComanche CountyClay CountyRooks CountyDickinson CountyPhillips CountyAnderson CountyLabette CountyHarper CountyJewell CountyOsage CountyRussell CountyElk CountyGraham CountyLinn CountyKearny CountyMitchell CountyLogan CountyChautauqua CountyGeary CountyOsborne CountyMeade CountySherman CountyFinney CountyMorton CountyGreenwood CountyHarvey CountyCowley CountyWilson CountyStanton CountyBarber CountyDecatur CountyButler CountyPottawatomie CountyCherokee CountyJohnson CountyKiowa CountyRush CountyMarshall CountyMarion CountySedgwick CountySmith CountyLeavenworth CountyCheyenne CountyDoniphan CountyJefferson CountyShawnee CountyOttawa CountyRepublic CountyMiami CountyRawlins CountyWyandotte CountyMontgomery CountyWashington CountyLincoln CountySeward CountyNorton CountyDouglas CountyStevens CountyRiley CountyWabaunsee CountyNess CountyStafford CountyWoodson CountyGove CountyKingman CountyCloud CountySumner CountyAtchison County

Cities and communities in Chase County

PlaceMedian mg/LClassBased on
Cottonwood Falls 278 Very hard 14 sites within 10 miles
Strong City 280 Very hard 15 sites within 10 miles
Matfield Green 275 Very hard county median
Elmdale 275 Very hard 13 sites within 10 miles
Cedar Point 430 Very hard 6 sites within 10 miles

Water quality in Chase County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Cottonwood Falls City of Cottonwood Falls Not tested 2 lead · 0 unknown None
Strong City City of Strong City Not tested 0 lead · 130 unknown None
Matfield Green City of Matfield Green Not tested Not reported None
Elmdale City of Elmdale Not tested 0 lead · 0 unknown 21
Cedar Point City of Cedar Point Not tested Not reported 7 (5 open)

Neighboring counties

Kansas

The statewide median is 245 mg/L (very hard) from 1,655 sites.

Kansas hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next