Water hardness in Reno County, KS

Water in Reno County is very hard, with a median of 294 mg/L (17.1 grains per gallon) across 24 monitoring sites.

20% harder than the Kansas median (245 mg/L) 44th hardest of 105 counties
294mg/L
17.1 grains per gallon
Very hard

Reno County water at a glance

  • HardnessVery hard (294 mg/L, 17.1 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 294 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 17.1 gpg (16.5 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites24
Lab samples750
Sample years2000–2023
Middle 50% of sites226–336 mg/L
Groundwater (wells, springs)315 mg/L · 1 sites
Surface water (rivers, lakes)290 mg/L · 23 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Reno County

Prefilled with Reno County's measured local hardness of 294 mg/L (17.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Reno County on the Kansas map

Lyon CountyAllen CountyEllsworth CountyHamilton CountyTrego CountyChase CountyFranklin CountyFord CountyWallace CountyBourbon CountyCoffey CountyNeosho CountyWichita CountyBrown CountyGreeley CountyMcPherson CountyMorris CountyThomas CountyJackson CountyLane CountyNemaha CountyScott CountyBarton CountyPawnee CountyRice CountyEllis CountyEdwards CountyGrant CountyClark CountyHodgeman CountyPratt CountyGray CountySheridan CountySaline CountyHaskell CountyCrawford CountyComanche CountyClay CountyRooks CountyDickinson CountyPhillips CountyAnderson CountyLabette CountyHarper CountyJewell CountyOsage CountyRussell CountyElk CountyGraham CountyLinn CountyKearny CountyMitchell CountyLogan CountyChautauqua CountyGeary CountyOsborne CountyMeade CountySherman CountyFinney CountyMorton CountyGreenwood CountyHarvey CountyCowley CountyWilson CountyStanton CountyBarber CountyDecatur CountyButler CountyPottawatomie CountyCherokee CountyJohnson CountyKiowa CountyRush CountyMarshall CountyMarion CountySedgwick CountySmith CountyLeavenworth CountyCheyenne CountyDoniphan CountyJefferson CountyShawnee CountyOttawa CountyRepublic CountyMiami CountyRawlins CountyWyandotte CountyMontgomery CountyWashington CountyLincoln CountySeward CountyNorton CountyDouglas CountyStevens CountyRiley CountyWabaunsee CountyNess CountyStafford CountyWoodson CountyGove CountyKingman CountyCloud CountySumner CountyAtchison County

Cities and communities in Reno County

PlaceMedian mg/LClassBased on
Hutchinson 330 Very hard 11 sites within 10 miles
South Hutchinson 330 Very hard 11 sites within 10 miles
Buhler 207 Very hard 12 sites within 10 miles
Haven 322 Very hard 15 sites within 10 miles
Nickerson 330 Very hard 9 sites within 10 miles
Pretty Prairie 230 Very hard 5 sites within 10 miles
Arlington 197 Very hard 6 sites within 10 miles
The Highlands 325 Very hard 9 sites within 10 miles
Turon 294 Very hard county median
Sylvia 294 Very hard county median
Partridge 215 Very hard 7 sites within 10 miles
Yoder (CDP) 250 Very hard 10 sites within 10 miles
Plevna 294 Very hard county median
Abbyville 215 Very hard 3 sites within 10 miles
Willowbrook 328 Very hard 10 sites within 10 miles
Langdon 239 Very hard 5 sites within 10 miles

Water quality in Reno County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Hutchinson City of Hutchinson None detected 0 lead · 0 unknown 1
South Hutchinson City of South Hutchinson Not tested 3 lead · 357 unknown None
Buhler City of Buhler Not tested 0 lead · 129 unknown None
Haven City of Haven Not tested 1 lead · 225 unknown None
Nickerson City of Nickerson Not tested 0 lead · 0 unknown None
Pretty Prairie City of Pretty Prairie Not tested 1 lead · 0 unknown 15
Arlington City of Arlington Not tested Not reported 5
Turon City of Turon Not tested 0 lead · 90 unknown 2
Sylvia City of Sylvia Not tested 0 lead · 97 unknown 35 (1 open)
Yoder Reno Co RWD 3 Not tested 0 lead · 18 unknown 1
Abbyville City of Abbyville Not tested Not reported None

Neighboring counties

Kansas

The statewide median is 245 mg/L (very hard) from 1,655 sites.

Kansas hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next