Water hardness in Gove County, KS
Water in Gove County is very hard, with a median of 1100 mg/L (64.3 grains per gallon) across 4 monitoring sites.
Gove County water at a glance
- HardnessVery hard (1,100 mg/L, 64.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 1100 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 64.3 gpg (61.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Gove County
Prefilled with Gove County's measured local hardness of 1100 mg/L (64.3 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Gove County on the Kansas map
Cities and communities in Gove County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Quinter | 1,100 | Very hard | county median |
| Grainfield | 1,100 | Very hard | county median |
| Grinnell | 1,100 | Very hard | county median |
| Park | 1,100 | Very hard | county median |
| Gove City | 1,100 | Very hard | county median |
Water quality in Gove County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Quinter | City of Quinter | Not tested | Not reported | None |
| Grainfield | City of Grainfield | Not tested | 0 lead · 181 unknown | None |
| Grinnell | City of Grinnell | Not tested | Not reported | None |
| Park | City of Park City | 5 found (PFOA ND / PFOS 4.5 ppt) | 1,548 lead · 2,050 unknown | None |
| Gove City | City of Gove | Not tested | Not reported | 5 |
Neighboring counties
- Sheridan County160 mg/L
- Lane County369 mg/L
- Trego County470 mg/L
- Logan County1000 mg/L
- Scott County287 mg/L
- Ness County500 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.