Water hardness in Marshall County, KS

Water in Marshall County is very hard, with a median of 260 mg/L (15.2 grains per gallon) across 19 monitoring sites.

about the same as the Kansas median (245 mg/L) 53rd hardest of 105 counties
260mg/L
15.2 grains per gallon
Very hard

Marshall County water at a glance

  • HardnessVery hard (260 mg/L, 15.2 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 260 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 15.2 gpg (14.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites19
Lab samples454
Sample years2000–2016
Middle 50% of sites240–324 mg/L
Groundwater (wells, springs)324 mg/L · 4 sites
Surface water (rivers, lakes)250 mg/L · 15 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Marshall County

Prefilled with Marshall County's measured local hardness of 260 mg/L (15.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Marshall County on the Kansas map

Lyon CountyAllen CountyEllsworth CountyHamilton CountyTrego CountyChase CountyReno CountyFranklin CountyFord CountyWallace CountyBourbon CountyCoffey CountyNeosho CountyWichita CountyBrown CountyGreeley CountyMcPherson CountyMorris CountyThomas CountyJackson CountyLane CountyNemaha CountyScott CountyBarton CountyPawnee CountyRice CountyEllis CountyEdwards CountyGrant CountyClark CountyHodgeman CountyPratt CountyGray CountySheridan CountySaline CountyHaskell CountyCrawford CountyComanche CountyClay CountyRooks CountyDickinson CountyPhillips CountyAnderson CountyLabette CountyHarper CountyJewell CountyOsage CountyRussell CountyElk CountyGraham CountyLinn CountyKearny CountyMitchell CountyLogan CountyChautauqua CountyGeary CountyOsborne CountyMeade CountySherman CountyFinney CountyMorton CountyGreenwood CountyHarvey CountyCowley CountyWilson CountyStanton CountyBarber CountyDecatur CountyButler CountyPottawatomie CountyCherokee CountyJohnson CountyKiowa CountyRush CountyMarion CountySedgwick CountySmith CountyLeavenworth CountyCheyenne CountyDoniphan CountyJefferson CountyShawnee CountyOttawa CountyRepublic CountyMiami CountyRawlins CountyWyandotte CountyMontgomery CountyWashington CountyLincoln CountySeward CountyNorton CountyDouglas CountyStevens CountyRiley CountyWabaunsee CountyNess CountyStafford CountyWoodson CountyGove CountyKingman CountyCloud CountySumner CountyAtchison County

Cities and communities in Marshall County

PlaceMedian mg/LClassBased on
Marysville 510 Very hard 5 sites within 10 miles
Blue Rapids 260 Very hard 6 sites within 10 miles
Frankfort 270 Very hard 7 sites within 10 miles
Waterville 245 Very hard 6 sites within 10 miles
Axtell 319 Very hard 7 sites within 10 miles
Beattie 260 Very hard county median
Home (CDP) 395 Very hard 4 sites within 10 miles
Summerfield 260 Very hard county median
Vermillion 296 Very hard 14 sites within 10 miles
Oketo 250 Very hard 6 sites within 10 miles
Bremen (CDP) 510 Very hard 5 sites within 10 miles
Herkimer (CDP) 250 Very hard 8 sites within 10 miles

Water quality in Marshall County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Marysville City of Marysville Not tested 10 lead · 1,415 unknown None
Blue Rapids City of Blue Rapids Not tested 0 lead · 0 unknown None
Frankfort City of Frankfort Not tested 36 lead · 238 unknown None
Waterville City of Waterville Not tested 1 lead · 5 unknown 5
Axtell City of Axtell Not tested Not reported 1 (1 open)
Beattie City of Beattie Not tested Not reported None
Summerfield City of Summerfield Not tested Not reported None
Vermillion City of Vermillion Not tested Not reported 1
Oketo City of Oketo Not tested Not reported 5

Neighboring counties

Kansas

The statewide median is 245 mg/L (very hard) from 1,655 sites.

Kansas hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next