Water hardness in New Albany, IN
Water in New Albany is very hard, with a median of 220 mg/L (12.9 grains per gallon) across 5 monitoring sites within 10 miles.
New Albany tap water at a glance
- HardnessVery hard (220 mg/L, 12.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 220 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 12.9 gpg (12.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for New Albany
Prefilled with New Albany's measured local hardness of 220 mg/L (12.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in New Albany tap water
New Albany is served by more than one water system. These systems supply ZIP codes in New Albany and were tested for PFAS ("forever chemicals") in EPA's nationwide UCMR 5 study. Check your water bill to see which one is yours.
Water systems serving New Albany
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Borden Tri-County Region serves over 10,000 people | None detected | — | Jun 2024 – Mar 2025 |
| Indiana American Water - S. Indiana serves over 10,000 people | None detected | — | Sep 2023 – Mar 2024 |
| Silver Creek Water Corporation serves over 10,000 people | None detected | — | Oct 2024 |
| Edwardsville Water Corporation serves over 10,000 people | None detected | — | Sep 2023 – Mar 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in New Albany
New Albany is served by more than one water system. Their service line inventories, as reported to EPA:
Water systems serving New Albany
| Water system | Service lines | Total |
|---|---|---|
| Borden Tri-County Region | 0 lead · 0 galvanized · 2,488 unknown | 4,354 |
| Indiana American Water - S. Indiana | 101 lead · 19 galvanized · 23,601 unknown | 42,868 |
| Edwardsville Water Corporation | 0 lead · 0 galvanized · 0 unknown | 4,600 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
New Albany drinking water violations
New Albany is served by more than one water system. Health-based violations recorded by EPA since 2016:
Water systems serving New Albany
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Borden Tri-County Region | 4 | 2 |
| Indiana American Water - S. Indiana | None | 0 |
| Silver Creek Water Corporation | None | 0 |
| Edwardsville Water Corporation | None | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to New Albany
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| OBS080-0001 Indiana STORET | River/Stream | 5.6 mi | 220 mg/L | 1 | 2000 |
| IN5222001 FLOYD 02106 PRODUCTION WELL 12 USGS Indiana Water Science Center | Well | 8.2 mi | 324 mg/L | 1 | 2019 |
| IN5210016 CLARK 00233 PRODUCTION WELL 8 USGS Indiana Water Science Center | Well | 8.3 mi | 320 mg/L | 1 | 2019 |
| OSK130-0001 Indiana STORET | River/Stream | 8.9 mi | 98 mg/L | 4 | 2000 |
| OSK140-0001 Indiana STORET | River/Stream | 9 mi | 125 mg/L | 2 | 2000 |
Water hardness in towns near New Albany
| Town | Distance | Median | Class |
|---|---|---|---|
| Clarksville | 3 mi | 172 mg/L | Hard |
| Sellersburg | 7 mi | 125 mg/L | Hard |
| Jeffersonville | 7 mi | 125 mg/L | Hard |
| Madison | 39 mi | 162 mg/L | Hard |
| Seymour | 44 mi | 220 mg/L | Very hard |
| Bedford | 52 mi | 224 mg/L | Very hard |
| Jasper | 61 mi | 124 mg/L | Hard |
| Columbus | 62 mi | 192 mg/L | Very hard |
| Bloomington | 70 mi | 302 mg/L | Very hard |
| Greensburg | 74 mi | 278 mg/L | Very hard |
Floyd County
New Albany is in Floyd County, where the median is 272 mg/L (very hard) across 2 sites.
See all of Floyd County →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.