Water hardness in Seymour, IN
Water in Seymour is very hard, with a median of 220 mg/L (12.9 grains per gallon) across 6 monitoring sites within 10 miles.
Seymour tap water at a glance
- HardnessVery hard (220 mg/L, 12.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesThe water system reported 2 lead service lines.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 220 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 12.9 gpg (12.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Seymour
Prefilled with Seymour's measured local hardness of 220 mg/L (12.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Seymour tap water
Indiana American Water - Seymour is the main public water system for Seymour. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 2 samples taken Mar 2023 – Sep 2023. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Seymour
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Jackson County Water Utility serves over 10,000 people | PFOA, PFOS | 6 / 5.1 ppt | Jul 2024 – Jan 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Seymour
Indiana American Water - Seymour reported 8,614 service lines (the pipes connecting homes to the water main) in its inventory. 2 are lead and 47 are galvanized lines that must be replaced, and 4,107 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Indiana American Water - Seymour whether your address is on its list.
Other water systems serving parts of Seymour
| Water system | Service lines | Total |
|---|---|---|
| Jackson County Water Utility | 0 lead · 0 galvanized · 0 unknown | 6,280 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Seymour drinking water violations
EPA records show no health-based violations for Indiana American Water - Seymour since 2016.
Other water systems serving parts of Seymour
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Jackson County Water Utility | None | 8 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Seymour
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| WEU040-0001 Indiana STORET | River/Stream | 2.2 mi | 294 mg/L | 58 | 2000–2004 |
| COOLEY CREEK NEAR SEYMOUR, IN USGS Indiana Water Science Center | Stream | 7.2 mi | 137 mg/L | 1 | 2004 |
| WEM070-0007 Indiana STORET | River/Stream | 9.4 mi | 195 mg/L | 3 | 2002 |
| WEU030-0011 Indiana STORET | River/Stream | 9.5 mi | 245 mg/L | 46 | 2000–2004 |
| WEM090-0005 Indiana STORET | River/Stream | 9.5 mi | 140 mg/L | 2 | 2002 |
| NAWQA AG WELL FA12S AT AZALIA, IN USGS Indiana Water Science Center | Well | 9.6 mi | 332 mg/L | 1 | 2000 |
Water hardness in towns near Seymour
| Town | Distance | Median | Class |
|---|---|---|---|
| Columbus | 18 mi | 192 mg/L | Very hard |
| Madison | 30 mi | 162 mg/L | Hard |
| Bedford | 33 mi | 224 mg/L | Very hard |
| Greensburg | 35 mi | 278 mg/L | Very hard |
| Bloomington | 37 mi | 302 mg/L | Very hard |
| Sellersburg | 38 mi | 125 mg/L | Hard |
| Franklin | 39 mi | 310 mg/L | Very hard |
| Shelbyville | 42 mi | 366 mg/L | Very hard |
| Martinsville | 43 mi | 297 mg/L | Very hard |
| Clarksville | 44 mi | 172 mg/L | Hard |
Jackson County
Seymour is in Jackson County, where the median is 164 mg/L (hard) across 8 sites.
See all of Jackson County →Seymour, IN water: common questions
Do I need a water softener in Seymour?
Very likely. Water measured around Seymour is 12.9 gpg (220 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 23,000 grains.Size it for your household →
Who supplies Seymour's drinking water?
The main public water system serving Seymour in EPA records is Indiana American Water - Seymour. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Seymour?
It depends on what you want to remove. In Seymour, the system reports 2 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- How to tell if your home has a lead pipe2 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.