Water hardness in Bedford, IN

Water in Bedford is very hard, with a median of 224 mg/L (13.1 grains per gallon) across 8 monitoring sites within 10 miles.

26% softer than the Indiana median (303 mg/L) 72nd hardest of 86 Indiana towns Population 13,855
224mg/L
13.1 grains per gallon
Very hard

Bedford tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 224 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 13.1 gpg (12.5 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites8
Lab samples194
Sample years2000–2019
Middle 50% of sites180–268 mg/L
Groundwater (wells, springs)306 mg/L · 1 sites
Surface water (rivers, lakes)207 mg/L · 7 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Bedford

Prefilled with Bedford's measured local hardness of 224 mg/L (13.1 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Bedford tap water

Bedford City Utilities is the main public water system for Bedford. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Mar 2023 – Dec 2023. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Bedford

Water systemPFAS detectedHighest PFOA / PFOSTested
North Lawrence Water Authority
serves over 10,000 people
None detected — Sep 2024 – Jun 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Bedford

Bedford City Utilities reported 5,991 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 5,043 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
5,043unknown material (84%)
948not lead (16%)

Other water systems serving parts of Bedford

Water systemService linesTotal
North Lawrence Water Authority1 lead · 0 galvanized · 2,488 unknown4,930

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Bedford drinking water violations

EPA records show no health-based violations for Bedford City Utilities since 2016. It also had 23 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Bedford

Water systemHealth-based violationsMonitoring/reporting
North Lawrence Water Authority32

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Bedford

SiteTypeDistanceMedianSamplesYears
SLT-12
Indiana STORET
River/Stream 1.5 mi99 mg/L552000–2004
IN5247007 LAWRENCE 02237 PRODUCTION WELL 5
USGS Indiana Water Science Center
Well 2.7 mi306 mg/L12019
WEL040-0003
Indiana STORET
River/Stream 3 mi240 mg/L432000–2004
WEL040-0006
Indiana STORET
River/Stream 4.3 mi267 mg/L12002
BSC
Indiana STORET
River/Stream 5.5 mi273 mg/L372000–2004
WEL100-0007
Indiana STORET
River/Stream 5.7 mi199 mg/L22002

Water hardness in towns near Bedford

TownDistanceMedianClass
Bloomington21 mi 302 mg/LVery hard
Seymour33 mi 220 mg/LVery hard
Martinsville38 mi 297 mg/LVery hard
Washington39 mi 147 mg/LHard
Columbus39 mi 192 mg/LVery hard
Jasper40 mi 124 mg/LHard
Bargersville50 mi 300 mg/LVery hard
Franklin50 mi 310 mg/LVery hard
Sellersburg50 mi 125 mg/LHard
New Albany52 mi 220 mg/LVery hard

Lawrence County

Bedford is in Lawrence County, where the median is 240 mg/L (very hard) across 9 sites.

See all of Lawrence County →

Indiana

The statewide median is 303 mg/L (very hard) from 1,344 sites.

Indiana hardness map →

Bedford, IN water: common questions

Do I need a water softener in Bedford?

Very likely. Water measured around Bedford is 13.1 gpg (224 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 23,000 grains.Size it for your household →

Who supplies Bedford's drinking water?

The main public water system serving Bedford in EPA records is Bedford City Utilities. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Bedford?

Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next