Water hardness in Bloomington, IN
Water in Bloomington is very hard, with a median of 302 mg/L (17.6 grains per gallon) across Monroe County.
There are not enough monitoring sites within 10 miles of Bloomington, so this page uses the Monroe County median.
Bloomington tap water at a glance
- HardnessVery hard (302 mg/L, 17.6 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesThe water system reported 17 lead service lines.Check your own pipe →
- Violations3 health-based violations since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 302 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 17.6 gpg (16.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Bloomington
Prefilled with Bloomington's measured local hardness of 302 mg/L (17.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Bloomington tap water
City of Bloomington Utilities is the main public water system for Bloomington. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken May 2023 – Feb 2024. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Bloomington
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Eastern Heights Utilities serves over 10,000 people | None detected | — | Nov 2023 – Jun 2024 |
| North Lawrence Water Authority serves over 10,000 people | None detected | — | Sep 2024 – Jun 2025 |
| Ellettsville Water Works serves over 10,000 people | None detected | — | Apr 2024 – Jan 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Bloomington
City of Bloomington Utilities reported 26,414 service lines (the pipes connecting homes to the water main) in its inventory. 17 are lead and 50 are galvanized lines that must be replaced, and 9,630 are still of unknown material.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask City of Bloomington Utilities whether your address is on its list.
Other water systems serving parts of Bloomington
| Water system | Service lines | Total |
|---|---|---|
| Eastern Heights Utilities | 0 lead · 0 galvanized · 0 unknown | 7,850 |
| North Lawrence Water Authority | 1 lead · 0 galvanized · 2,488 unknown | 4,930 |
| Ellettsville Water Works | 14 lead · 19 galvanized · 1,728 unknown | 5,706 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Bloomington drinking water violations
EPA records show 3 health-based violations for City of Bloomington Utilities since 2016, all since resolved or closed. The most recent began in Aug 2024. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Surface water treatment (filtration/turbidity) filtration requirements that protect against microbes such as Cryptosporidium | Treatment requirement not met | 1 | Aug 2024 | Resolved/closed |
| Lead and Copper Rule corrosion control, testing and notification requirements for lead | Treatment requirement not met | 2 | Jan 2018 | Resolved/closed |
Other water systems serving parts of Bloomington
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Eastern Heights Utilities | None | 0 |
| North Lawrence Water Authority | 3 | 2 |
| Ellettsville Water Works | 3 | 2 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Bloomington
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| WWL040-0005 Indiana STORET | River/Stream | 7.8 mi | 302 mg/L | 3 | 2001 |
Water hardness in towns near Bloomington
| Town | Distance | Median | Class |
|---|---|---|---|
| Martinsville | 18 mi | 297 mg/L | Very hard |
| Bedford | 21 mi | 224 mg/L | Very hard |
| Bargersville | 31 mi | 300 mg/L | Very hard |
| Columbus | 33 mi | 192 mg/L | Very hard |
| Franklin | 34 mi | 310 mg/L | Very hard |
| Seymour | 37 mi | 220 mg/L | Very hard |
| Plainfield | 37 mi | 269 mg/L | Very hard |
| Greenwood | 38 mi | 303 mg/L | Very hard |
| Danville | 41 mi | 309 mg/L | Very hard |
| Avon | 42 mi | 193 mg/L | Very hard |
Monroe County
Bloomington is in Monroe County, where the median is 302 mg/L (very hard) across 1 sites.
See all of Monroe County →Bloomington, IN water: common questions
Do I need a water softener in Bloomington?
Very likely. Water measured around Bloomington is 17.6 gpg (302 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 31,000 grains.Size it for your household →
Who supplies Bloomington's drinking water?
The main public water system serving Bloomington in EPA records is City of Bloomington Utilities. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Bloomington?
It depends on what you want to remove. In Bloomington, the system reports 17 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced; the system had 3 health-based violations since 2016, for the Interim Enhanced Surface Water Treatment Rule and the Lead and Copper Rule; the utility's annual report says what was done about them. On the other hand, no PFAS found in EPA testing. A water softener is not a filter.Check your own service line →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- How to tell if your home has a lead pipe17 lead service lines are reported here.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.