Water hardness in Martinsville, IN

Water in Martinsville is very hard, with a median of 297 mg/L (17.3 grains per gallon) across 7 monitoring sites within 10 miles.

about the same as the Indiana median (303 mg/L) 44th hardest of 86 Indiana towns Population 11,946
297mg/L
17.3 grains per gallon
Very hard

Martinsville tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 297 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 17.3 gpg (16.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites7
Lab samples120
Sample years2000–2004
Middle 50% of sites244–318 mg/L
Surface water (rivers, lakes)297 mg/L · 7 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Martinsville

Prefilled with Martinsville's measured local hardness of 297 mg/L (17.4 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Martinsville tap water

Martinsville Water Utility is the main public water system for Martinsville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 2 samples taken Feb 2023 – Aug 2023. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Martinsville

Water systemPFAS detectedHighest PFOA / PFOSTested
Brown County Water Utility
serves over 10,000 people
PFOA, PFOS, PFPeA +2 more 12.9 / 10.5 ppt Jul 2023 – Mar 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Martinsville

Martinsville Water Utility reported 4,624 service lines (the pipes connecting homes to the water main) in its inventory. 6 are lead and 60 are galvanized lines that must be replaced, and 3,774 are still of unknown material.

6lead (<1%)
60galvanized requiring replacement
3,774unknown material (82%)
784not lead (17%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Martinsville Water Utility whether your address is on its list.

Other water systems serving parts of Martinsville

Water systemService linesTotal
Brown County Water Utility0 lead · 0 galvanized · 0 unknown6,147

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Martinsville drinking water violations

EPA records show no health-based violations for Martinsville Water Utility since 2016. It also had 5 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Martinsville

Water systemHealth-based violationsMonitoring/reporting
Brown County Water UtilityNone5

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Martinsville

SiteTypeDistanceMedianSamplesYears
WWU160-0004
Indiana STORET
River/Stream 1.1 mi320 mg/L522000–2004
WWU180-0003
Indiana STORET
River/Stream 3.5 mi317 mg/L22001
WWU160-0002
Indiana STORET
River/Stream 5.5 mi297 mg/L92002–2004
WR-205
Indiana STORET
River/Stream 6.8 mi229 mg/L12001
WWU150-0007
Indiana STORET
River/Stream 7.1 mi324 mg/L532000–2004
WWU140-0007
Indiana STORET
River/Stream 7.3 mi260 mg/L12001

Water hardness in towns near Martinsville

TownDistanceMedianClass
Bargersville15 mi 300 mg/LVery hard
Bloomington18 mi 302 mg/LVery hard
Plainfield20 mi 269 mg/LVery hard
Franklin21 mi 310 mg/LVery hard
Greenwood22 mi 303 mg/LVery hard
Avon24 mi 193 mg/LVery hard
Danville24 mi 309 mg/LVery hard
Beech Grove28 mi 264 mg/LVery hard
Speedway28 mi 196 mg/LVery hard
Brownsburg29 mi 196 mg/LVery hard

Morgan County

Martinsville is in Morgan County, where the median is 297 mg/L (very hard) across 11 sites.

See all of Morgan County →

Indiana

The statewide median is 303 mg/L (very hard) from 1,344 sites.

Indiana hardness map →

Martinsville, IN water: common questions

Do I need a water softener in Martinsville?

Very likely. Water measured around Martinsville is 17.3 gpg (297 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 30,000 grains.Size it for your household →

Who supplies Martinsville's drinking water?

The main public water system serving Martinsville in EPA records is Martinsville Water Utility. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Martinsville?

It depends on what you want to remove. In Martinsville, the system reports 6 lead service lines; if your home has one, a filter certified to remove lead is the usual step until the line is replaced. On the other hand, no PFAS found in EPA testing and no health-based violations since 2016. A water softener is not a filter.Check your own service line →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next