Water hardness in Danville, IN
Water in Danville is very hard, with a median of 309 mg/L (18 grains per gallon) across 6 monitoring sites within 10 miles.
Danville tap water at a glance
- HardnessVery hard (309 mg/L, 18 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS2 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesNo lead service lines reported.Details →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 309 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 18 gpg (17.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Danville
Prefilled with Danville's measured local hardness of 309 mg/L (18.1 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Danville tap water
Danville Water Works is the main public water system for Danville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Apr 2024 – Dec 2025. 2 PFAS were detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFPeA perfluoropentanoic acid | 3.8 ppt | 3 of 8 samples | — |
| PFHxA perfluorohexanoic acid | 3 ppt | 1 of 8 samples | — |
Other water systems serving parts of Danville
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Plainfield Water Works serves over 10,000 people | PFPeA, PFBS, PFHxA | — | Mar 2025 – Oct 2025 |
| Citizens Water - Indianapolis serves over 10,000 people | PFPeA, PFBA, PFHxA +1 more | — | Aug 2023 – Aug 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Danville
Danville Water Works reported 3,304 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.
Other water systems serving parts of Danville
| Water system | Service lines | Total |
|---|---|---|
| Plainfield Water Works | 0 lead · 0 galvanized · 210 unknown | 11,040 |
| Citizens Water - Indianapolis | 56,766 lead · 195 galvanized · 39,935 unknown | 374,679 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Danville drinking water violations
EPA records show no health-based violations for Danville Water Works since 2016. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Danville
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Plainfield Water Works | 1 | 2 |
| Citizens Water - Indianapolis | None | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Danville
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| NAWQA AG WELL TP21 NEAR TILDEN, IN USGS Indiana Water Science Center | Well | 4.2 mi | 350 mg/L | 2 | 2002–2014 |
| RAMP RUN CREEK NEAR NORTH SALEM, IN USGS Indiana Water Science Center | Stream | 8.4 mi | 316 mg/L | 1 | 2004 |
| NAWQA AG WELL TP4 AT RAINTOWN, IN USGS Indiana Water Science Center | Well | 8.6 mi | 310 mg/L | 2 | 2002–2014 |
| WWU150-0012 Indiana STORET | River/Stream | 9.4 mi | 308 mg/L | 1 | 2001 |
| WWU150-0011 Indiana STORET | River/Stream | 9.8 mi | 298 mg/L | 3 | 2001 |
| SCHOOL BRANCH AT NOBLE DRIVE AT BROWNSBURG, IN USGS Indiana Water Science Center | Stream | 9.9 mi | 268 mg/L | 9 | 2016–2018 |
Water hardness in towns near Danville
| Town | Distance | Median | Class |
|---|---|---|---|
| Avon | 5 mi | 193 mg/L | Very hard |
| Brownsburg | 8 mi | 196 mg/L | Very hard |
| Plainfield | 8 mi | 269 mg/L | Very hard |
| Speedway | 13 mi | 196 mg/L | Very hard |
| Whitestown | 16 mi | 231 mg/L | Very hard |
| Zionsville | 19 mi | 292 mg/L | Very hard |
| Indianapolis | 19 mi | 292 mg/L | Very hard |
| Lebanon | 19 mi | 318 mg/L | Very hard |
| Bargersville | 22 mi | 300 mg/L | Very hard |
| Beech Grove | 22 mi | 264 mg/L | Very hard |
Hendricks County
Danville is in Hendricks County, where the median is 308 mg/L (very hard) across 14 sites.
See all of Hendricks County →Danville, IN water: common questions
Do I need a water softener in Danville?
Very likely. Water measured around Danville is 18 gpg (309 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 31,000 grains.Size it for your household →
Who supplies Danville's drinking water?
The main public water system serving Danville in EPA records is Danville Water Works. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Danville?
It depends on what you want to remove. In Danville, EPA testing found PFPeA and PFHxA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 2 PFAS in Danville's main water system.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.