Water hardness in Morgan County, IN
Water in Morgan County is very hard, with a median of 297 mg/L (17.3 grains per gallon) across 11 monitoring sites.
Morgan County water at a glance
- HardnessVery hard (297 mg/L, 17.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 297 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 17.3 gpg (16.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Morgan County
Prefilled with Morgan County's measured local hardness of 297 mg/L (17.4 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Morgan County on the Indiana map
Cities and communities in Morgan County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Martinsville | 297 | Very hard | 7 sites within 10 miles |
| Mooresville | 311 | Very hard | 8 sites within 10 miles |
| Brooklyn | 308 | Very hard | 11 sites within 10 miles |
| Monrovia | 297 | Very hard | 9 sites within 10 miles |
| Morgantown | 297 | Very hard | county median |
| Painted Hills (CDP) | 317 | Very hard | 7 sites within 10 miles |
| Paragon | 317 | Very hard | 3 sites within 10 miles |
| Bethany | 308 | Very hard | 11 sites within 10 miles |
| Browns Crossing (CDP) | 307 | Very hard | 6 sites within 10 miles |
| Centerton (CDP) | 308 | Very hard | 11 sites within 10 miles |
| Eminence (CDP) | 281 | Very hard | 7 sites within 10 miles |
| Foxcliff Estates (CDP) | 315 | Very hard | 11 sites within 10 miles |
Water quality in Morgan County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Martinsville | Martinsville Water Utility | None detected | 6 lead · 3,774 unknown | None |
| Mooresville | Indiana American Water - Mooresville | None detected | 1 lead · 1,677 unknown | None |
| Brooklyn | Brooklyn Water Works | Not tested | 0 lead · 0 unknown | None |
| Morgantown | Morgantown Water Utility | Not tested | 0 lead · 0 unknown | None |
| Paragon | Paragon Water Works | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Johnson County309 mg/L
- Hendricks County308 mg/L
- Monroe County302 mg/L
- Brown County87 mg/L
- Owen County280 mg/L
- Putnam County288 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.