Why does my tap water taste like chlorine?
Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: the taste or smell comes from chlorine or chloramine, disinfectants your utility adds to kill germs and keep water clean in the pipes. EPA's limit for each is 4.0 mg/L. An activated carbon filter (pitcher, faucet or under-sink) removes the chlorine taste.
Chlorine vs chloramine
| Chlorine | Chloramine | |
|---|---|---|
| What it is | The most common primary disinfectant | Usually chlorine plus ammonia |
| Why utilities use it | Kills germs at the treatment plant and in pipes | Longer-lasting disinfection in pipes; some utilities switched to it to meet disinfection byproduct rules |
| EPA limit (MRDL) | 4.0 mg/L | 4.0 mg/L (as chlorine) |
EPA says water with chloramines that meets its standards is safe for drinking, cooking, bathing and other household uses, and that more than one in five Americans drink water treated with chloramines. Your utility's annual water quality report says which disinfectant it uses and the levels measured.
Why the taste changes
Utilities adjust disinfectant levels to keep water disinfected throughout the system, so the taste can vary. Disinfectants also react with natural matter in water to form byproducts such as TTHM, which have their own limits; your town page shows any violations.
Reducing the taste at home
- Activated carbon filters remove chlorine. Many pitchers, faucet filters and refrigerator filters use carbon.
- Reverse osmosis systems usually include a carbon filter for chlorine, which protects the membrane. See reverse osmosis.
- For chloramine specifically, check the filter's certification listing; not every carbon filter is certified for it.
Look up your water system's PFAS, lead and violation records before choosing a filter, so it covers everything you care about.
Frequently asked questions
Why does my tap water taste like chlorine?
Utilities add chlorine or chloramine to kill germs and keep water disinfected as it travels through pipes. A noticeable taste or smell usually comes from that disinfectant.
What is the limit for chlorine in drinking water?
EPA's maximum residual disinfectant level is 4.0 mg/L for chlorine and 4.0 mg/L for chloramines (as chlorine), measured as an annual average.
What is chloramine?
A disinfectant usually formed by adding ammonia to chlorine. It lasts longer in the pipes. EPA says utilities have used chloramines since the 1930s and more than one in five Americans drink water treated with them.
How do I get rid of the chlorine taste?
An activated carbon filter removes chlorine, according to University of Nebraska–Lincoln Extension. Check a filter's certification listing if you want it to reduce chloramine specifically.