Water hardness in Madison County, ID
Water in Madison County is hard, with a median of 175 mg/L (10.2 grains per gallon) across 24 monitoring sites.
Madison County water at a glance
- HardnessHard (175 mg/L, 10.2 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 175 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 10.2 gpg (9.8 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Madison County
Prefilled with Madison County's measured local hardness of 175 mg/L (10.2 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Madison County on the Idaho map
Cities and communities in Madison County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Rexburg | 178 | Hard | 24 sites within 10 miles |
| Sugar City | 145 | Hard | 27 sites within 10 miles |
Water quality in Madison County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Rexburg | City of Rexburg | None detected | 0 lead · 0 unknown | 1 |
| Sugar City | City of Sugar City | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Teton County196 mg/L
- Bonneville County230 mg/L
- Fremont County100 mg/L
- Jefferson County198 mg/L
- Clark County126 mg/L
- Bingham County214 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.